The second-hand machinery of CECAMASA catches the public's interest in FITMAQ 2019

From CECAMASA we value our participation in the International Fair of Used Machinery and Equipment (FITMAQ), held from 4 to 6 June at the Bilbao Exhibition Center, very highly. We attended the trade fair with a 200 square meter booth where we exhibited two machines from our stock of second-hand machinery: a bed type milling machine of the reputed brand ZAYER, model 30 KF-5000 and a DOOSAN PUMA MX 2500 LST multitasking cnc lathe, of which we will talk in further detail later.

Trade shows offer without any kind of doubt an excellent opportunity for networking and what is even more important, they allow us to gather firsthand information of the needs of the market and, in that sense, this edition of the FITMAQ 2019 has not been an exception. This event has allowed us to make new contacts, at national and international level, meet again our customers and make new deals.

We are very pleased to note that the second-hand industrial machines that we showed at the fair have caught the general interest of the public: from the student of machining and the retired man impressed by the technological improvements achieved to the managers and workers who appreciate the performance of a good machine. There is no greater reward than to see that all the effort made has been worthy.

On the occasion of this industrial fair, we have presented our new catalog where you can find a variety of new and second-hand industrial machinery. See machines physically is one of the added values of ​​FITMAQ, and in this edition lathes, milling machines, machining centers, grinders, turning centers, bending and shearing machines could have been seen.

Information on the most relevant products in FITMAQ 2019

In CECAMASA we have a wide range of models of milling machines and CNC lathes. As above-mentioned, in 2019 FITMAQ we have shown the multitasking lathe DOOSAN PUMA MX 2500 LST and the ZAYER milling machine 30 KF-5000, the latter machine was the star of the booth because of its performance and its size, as it has a bed of five meters - being the largest machine exhibited at the fair.

Be advised that all our second-hand milling machines have been thoroughly checked by a highly qualified team in order to be delivered to the customer in perfect condition. In CECAMASA we bet on well-known brands such as ZAYER milling machines, SORALUCE milling machines and NICOLAS CORREA milling machines.

Second-hand ZAYER 30KF-5000 milling machine

The ZAYER 30 KF-5000 milling machine is particularly known for its travels - 4710 mm in X-axis, 2013 mm in Y-axis and 1508 mm in Z-axis - and its 45º automatic head with 0.001º accuracy in the two bodies and spindle rotation simultaneously. In spite of being a bed type milling machine, it provides traverses like a traveling column milling machine with the benefit that a bed type milling machine does not require the foundation of a traveling column milling machine.

Second-hand multitasking DOOSAN PUMA MX 2500 LST cnc lathe

The multitasking DOOSAN PUMA MX 2500 LST lathe exhibited as well at our booth has a high technological component, it is a multitasking lathe of 9 axes fully equipped with hydraulic chuck, spindle and subspindle, boring head, tool changer of 40n units, turret with motorised tool, chip conveyor and FANUC 18i-TB control. The technical features of this second-hand CNC lathe make it ideal for finishing working pieces very quickly.

In addition to the industrial machinery shown at FITMAQ 2019, we have other types and models of used machines in our facilities in Parets del Vallès (Barcelona). Do you want to get a copy of our new catalog of second-hand machinery with detailed information? Please contact us or download it here.

CECAMASA presents its new catalog of Industrial Machinery

DOWNLOADABLE NEW CATALOG OF CECAMASA

CECAMASA catalogs of second-hand industrial machinery

CECAMASA is a company specialized in the field of Industrial Machinery. Like every year, we would like to show our commitment to the International Fair of Used Machinery, offering the best exhibition space of new and second-hand industrial machinery.

Moreover, we have a new extensive catalog with the main brands of the market currently available at our headquarters. Come to see all the options at our booth B56 in hall 5 of FITMAQ!

Second-hand machining centers

We have a wide range of used machining centers able to perform a variety of machining operations. The machining centers allow multiple machining operations highlighting the production speed and precision. Find below the second-hand models available:

  • DAHLIH MCV 1450. CNC FANUC 18-M. Table: 1600x880mm.
  • LAGUN L-100. CNC HEIDENHAIN iTNC 530. Table: 1070x510mm.
  • KONDIA B-1050. CNC FANUC 21 i – M. Table: 1200x500mm.
  • DAEWOO MYNX 540. CNC FANUC SERIE 21 iM (Digital). Travels: 1020x510x625mm.
  • DAEWOO MYNX 500. CNC FANUC SERIE 21 iM. Travels: 1020x510x625mm.

Second-hand milling machines

The second-hand milling machines are emerging as one of our flagship products. Our extensive experience in the market supports us and allows us to advise in the best possible way on the acquisition of high quality used equipment. Our milling machines have been thoroughly checked by our team of experts to reach the customer in perfect conditions. Below we show our available range of bridge type milling machines, of mobile column, and bed type machines:

  • ZAYER 30 AR 16000 KCU. Brand: ZAYER. Model: 30 KCU AR 16000. Travels: 16,000×1,500×3,500mm. Pick-up head. 45º head (0.001º-0.001º) and d'ANDREA UT5/500 S head. Tool changer of 100 units. Rübenach 10,000 × 2,500 × 300 mm clamping plate. Rübenach 4,000 × 2,500 × 300 mm clamping plate. Peiseler ATU 1600/2500 x 2500 rotary table with a max allowed weight of 20 tons. Chip conveyor.
  • ZAYER KPCU AR 6000 DT. Brand: ZAYER. Model: KPCU 6000 AR DT. Double-table system. Combined table: 6,000 x 2,000 mm. CNC A/B axes 360000 positions each thousandth of a degree in the two bodies. Tool changer 100 units. Coolant through the spindle. 2 chip conveyors.
  • ZAYER 30KF-5000. CNC HEIDENHAIN TNC 426 table: 5000x1000mm. Travels: 4710x1508x2013mm. Automatic head 45 (0.001º - 0.001º). Chip conveyor.
  • NICOLAS CORREA A30 / 40. CNC HEIDENHAIN TNC 426. Table: 4500x1100mm. Travels: 4000x1250x1500mm. Automatic head: 3º-3º.
  • SORALUCE TR-35. CNC HEIDENHAIN TNC 426. Table: 3860x1200mm. Travels: 3500x1200x1600mm. Automatic head 2.5 ° - 2.5 °. ATC 30 tools. Chip extractor.
  • NICOLAS CORREA FP -30/40. CNC HEIDENHAIN 426. Table: 4000x1250mm. Travels: 3500x2300x800mm. Manual HURON head and direct output head. CE standards.
  • SORALUCE TA-35. CNC HEIDENHAIN iTNC 530. Table: 3700x1000mm. Travels: 3500x1200x1250mm. Automatic head: 2.5 °- 2.5 °. Tool changer 20 tools. 2 chip conveyors. Full enclosure. Year 2009.
  • SORALUCE TA-20. CNC HEIDENHAIN TNC 426. Table: 2000x800mm. Travels: 2000x800x800mm. Chip conveyor. Full enclosure.
  • ZAYER 20 KF 3000. CNC FAGOR 8055. Table: 3000x1000mm. Travels: 2710x1204x1004mm.
  • ANAYAK VH-2200. CNC FAGOR 8050 M. Table: 2200×600 mm. Travels: 2000x900x800mm.
  • NICOLAS CORREA CF-22/20 PLUS. CNC HEIDENHAIN TNC 426. Table: 2000x700mm.

Second-hand CNC lathes

See below our range of second-hand CNC lathes available for sale, machines that offer accurate finishes as they are equipped with numerical controls that simplify the operator's work, that also means cost savings for the company. In CECAMASA we have the following available options:

  • GEMINIS GHT5 G2. CNC SIEMENS 810 D. E.P. 4000mm. Max swing over bed 1000mm. Manual turret. Internal cooling. Chip conveyor. 2009.
  • DOOSAN (DAEWOO) PUMA MX 2500 LST - Multitasking - 9 axes. FANUC 18i-TB CNC. E.P. 1520 mm. Max swing over bed 750 mm. Milling head. Motorized turret. ATC 40 units. Chip conveyor. Sets of motorized tools. Year 2007.
  • DOOSAN (DAEWOO) PUMA 300 LB. CNC FANUC 18-T. E.P. 3000mm. Max swing over bed 570mm. Kitagawa chuck.
  • TRAVIS TR-1. FAGOR 8055. E.P. 1000mm. Max swing over bed 450mm. Well equipped.
  • DAEWOO PUMA 400 LMB. FANUC CNC 21iTB. E.P. 2000mm. Swing over bed 700mm. Hydraulic chuck and steady rest of the make SMW Autoblock. Motorized turret. Axis C 100 1/min.

Second-hand shears

The shears belong to the category of sheet metal forming machinery. Within the field of metallurgy, shear is used to cut steel sheets, aluminum or iron of different thickness. Shears can be manual, in that case the up and down movement is carried out by an operator or that movement can be done automatically in that case we are talking of hydraulic shears.

Its way of working is relatively simple because it is based on two blades, one positioned on the table and another located on the slider or on the blade-holder bridge (depending on whether the shearing has throat or not) then they meet and press the surface of the sheet metal until it is separated into two parts.

Below, you can check our range of used shears available for sale:

  • KLINSMAN RPG 3106 hydraulic shear. 3100X6mm. Vertical cut, variable angle and motorized backgauge. Year 2006.
  • Shearing machine with electro-pneumatic clutch. HACO MS3004 3050x4mm. Digital readout backgauge.

Second-hand grinding machines

The industrial machines which are used in the machining of parts are known as grinders. In general, grinding is an operation that takes place in those parts which require specific measures and tolerances, in terms of size, geometry or surface finish (roughness, striped directionality, etc.).

There are different types of grinding required for various types of machines. Below, you can check all our used grinders:

  • GER RHC 1000 universal grinding machine. Distance between centers: 1,000mm. Max grinding diameter: 355mm. Grinding wheel: Ø 400x50x127mm.
  • ESTARTA 301MV centreless grinding machine (3 units). CNC FANUC. Infeed and in-through grinding.
  • GER S-100/50 tangential grinding machine. CNC FAGOR. Travels: 1160x500mm. Grinding wheel: Ø 400x100x127mm. Magnetic chuck of fine pole: 1000x500mm.
  • GER S-60/40 tangential grinding machine. CNC FAGOR. Travels: 660x400mm. Magnetic chuck of fine pole: 600x410mm.

Apart from the machines mentioned in this post, we have other types and models of used machines at our facilities in Parets del Valles (Barcelona) and have recently acquired the following grinders:

  • DANOBAT universal grinding machine. Distance between centers: 1200mm. Max grinding diameter: 350mm. Equipped with HEIDENHAIN digitals.
  • HIDRO-PRECIS TP-55/1250 tangential griding machine. Travels: 1250x690x500mm. Grinding wheel: Ø400x127x50mm. Electromagnetic chuck of 1250x700mm . Balancing grinding wheel. Hydraulic diamond grinder wheel.
  • HIDRO-PRECIS TP-70/1600 tangential grinding machine. Travels: 1790x670x600mm. Grinding wheel: Ø400x127x50 / 100mm. SELTER electromagnetic chuck of 1660x700mm. Balancing grinding wheel. Hydraulic diamond grinder wheel. Regulations and CE certification.

Would you like to see the new catalog of the second-hand machinery of CECAMASA with detailed information? Download it here and do not hesitate to contact us if you have any doubts concerning our second-hand machinery.

New catalog of industrial machinery - CECAMASA 2019

CECAMASA will attend the fourth edition of FITMAQ

fitmaq-cecamasa

In this post we announce that, once again, in CECAMASA we focus on specialized fairs of the industrial machinery sector and we will attend the fourth edition of FITMAQ 2019, the International Fair of Used Machinery which will be held at the Bilbao Exhibition Center (BEC) from 4 to 6 June. FITMAQ is a biannual exhibition that offers the best space for new and second-hand industrial machinery in Spain, with the attendance of leading companies in the machinery equipment sector, and Latin American firms, which see Spain as a major potential growth market.

This degree of specialization makes this a must event for professionals, from both national and international spheres, of the machinery equipment. This edition is also even more appealing as FITMAQ is included within the + Industry platform that will bring together a total of 7 shows that revolve around manufacturing processes and supplies of the Industry 4.0.

Come and visit us at stand B56 in Hall 5

This year, as in previous editions, CECAMASA will attend the event with the aim of being able to meet the needs of all those who visit us at our booth B56 in Hall 5. We come here with a stand of 200 square meters where we will present our new acquisitions, which will expose graphically all our inventory of second-hand machinery and, of course, we will exhibit in situ two or three large second-hand machines.

New and second-hand industrial machinery

We will especially emphasize families of used machines in which we are specialists such as bed type milling machine ,bridge milling machine, travelling column milling machine of worldwide known brands as ZAYER milling machines, SORALUCE mlling machines, NICOLAS CORREA milling machines and other brands such as LAGUN milling machines and ANAYAK milling machines.

We will also present our wide range of second-hand machining centers of different brands such as LAGUN machining center, DOOSAN machining center, KONDIA machining center, and not so known as vertical machining centre of the make DAHLIH.

Also, we will present our entire range of numerical control machines, which have recently expanded with CNC lathes of the make DOOSAN (DAEWOO), not to mention other families of machines as they are grindersin all its forms (tangential grinding machines, centerless grinding machines with in feed grinding or through feed grinding, universal grinders, etc.), shears, bending machines, cylinders, and many other machines that you can not miss out.

And, of course, we will also offer you information of our represented brands of new machinery such as Klinsman shears and pressbrakes , JUARISTI boring and milling machines, EQUIPTOP grinding machines and, as collaborators that we are, we will also provide you with information about the entire range of LAGUN machines and FACCIN deformation sheet machines.

The team that we make up CECAMASA will try our best to assist in the best possible way both new customers and customers who have already placed their trust in us in the sale of used machinery. Remember that we are looking forward to seeing you from 4 to 6 June at our booth B56 and if you want to plan ahead a visit with us, do not hesitate to contact us via email or by phone.

New extension to our catalog of used machinery

Second-hand Daewoo Puma 300 cnc lathe

In CECAMASA we have substantially expanded our large catalog of used machinery during the last months, increasing in that way the stock of new machines and the stock of used machines available for sale. Firstly, we would like to outline the purchase of four numerical control lathes. Three of the well-known Korean brand DOOSAN and the other one of the brand TRAVIS. The three cnc lathes DOOSAN-DAEWOO are in excellent conditions and we encourage to everyone interested in some of them to visit our premises located at the city of Parets del Vallès, Barcelona.

Recent types of CNC lathes

The first lathe that we present you is DOOSAN – DAEWOO model 300 LB, belong to the PUMA series, the heavy series of the DOOSAN brand. It is a simple machine of two axes with a FANUC 18-T control and it is equipped with a KITAGAWA chuck with 300 mm of diameter and a chip conveyor. It is a second-hand cnc lathe which is ideal for any machining workshop.

The second lathe is a DOOSAN – DAEWOO PUMA 400 LMB, and it falls too into the category of heavy machinery. It is a CNC lathe with a distance between centers of 2,000 mm and a tourning diameter of big dimensions. We would like to outline its turret with motorized tools. Besides, it has a chuck with 380 mm diameter and a SLU-4 hydraulic steady rest, both SMW AUTOBLOCK, chip conveyor and FANUC 21i-TB control.

The third and final entry of DOOSAN - DAEWOO lathe added to the catalog is a model DOOSAN – DAEWOO PUMA MX 2500 LST. It is a second-hand multitasking lathe of 9 axes. That used CNC lathe is equipped with a hydraulic chuck, spindle and sub-spindle, turret with motorized tool, head for boring, tool changer of 40 tools, chip conveyor and control FANUC 18i-TB. Its technical specifications and its equipment make it an ideal machine for finishing pieces at once.

Finally, the fourth lathe acquired recently of the brand TRAVIS is a semi-control lathe more simple and more economical than the previous ones. Moreover, it is en perfect working conditions.

And that's not all, we also have machining centers and grinding machines. Apart from other machines of different models of numerical control available in our website.

Furthermore, we have acquired 3 grinding machines of the brand DANOBAT of numerical control model ESTARTA 301 MV in very good conditions. Those machines date from 2004-2005 and they have a large equipment such as grinding wheels and pole-holders, just to name a few. Among those second-hand grinding machines we have machines with in-feed grinding and machines with through feed grinding.

Grinding de segunda mano starter MV 301

This last month we increased our list of new industrial and second hand machinery by acquiring two machining centers LAGUN model L-1000 from 2011. Those used machines are in really good conditions and have a few working hours. However, the most remarkable thing of these machines are that they are equipped with HEIDENHAIN iTNC 530 numerical control. LAGUN is a national brand very consolidated in the Spanish machine-tool market and in CECAMASA we have the pleasure to cooperate with them.

Apart from second-hand machining centers of the make LAGUN, we have also increased our stock references of used machinery with two additional machining centers, but this time of the brand DOOSAN. We have a machining center DOOSAN – DAEWOO MYNX 500 and a machining center DOOSAN – DAEWOO MYNX 540. They are very versatile tools and those machining centers are ideal for any kind of drilling and deep machining that requires of inner cooling.

Lastly, we would like to outline the wire edm of the brand FANUC model ROBOCUT ALPHA-0iB, another addition totally overhauled by FANUC. It is machine with median dimensions and travels which presents a great versatility and it is especially recommended for the die-manufacturing sector of small dimensions.

If you want to know in further detail our inventory of used machinery, CNC lathes or machining centers available for sale in our website, contact us. Our team in CECAMASA will be more than happy to assist you personally and will answer all your questions.

Our machining centers and their key advantages

CENTER machining center HERMLE C40U - 0

This time we want to talk about one of the star products of CECAMASA which occupies a privileged position in our catalog of used machinery, along with cnc milling machines and the cn lathes, that is the machining centers.

In this new post we explain in detail the following points:

  1. What is a machining center?
  2. Know the key advantages of machining centers
  3. What are the two main types of machining center?
  4. What is a vertical machining center?
  5. Our range of used machining centers
  6. Our recent acquisition: HERMLE 5-axes vertical machining center

1. What is a machining center?

A vertical machining centre is a machine that has a high degree of automation by using a CNC (Computer Numerical Control) which performs several machining operations that hardly require the intervention of an operator.

The milling machines may be conventional machines or machines equipped with numerical control, however, a vertical machining centre always has a CNC.

The appearance of this machine tool is linked to the implementation of the digital control technology in this type of industrial machinery. And it was designed precisely with the aim of achieving more accuracy of the milling task and more safety, that is why so many professionals in our industry say the vertical machining centre is the machine tool result of technological developments of the milling machine in the field of machining.

But be careful as this statement can lead to confusion, the vertical machining centre not only is able to mill, but it can also perform other tasks such as drilling or threading, and all always guarantee accurate results.

2. Know the key advantages of machining centers

The advantages of using a vertical machining centre are manifold. We thought it might be useful to know the main advantages associated with their applications:

  • They are machines that offer very good finishes thus help improve accuracy of the work done.
  • They are machines which are versatile as they are able to carry out various machining operations on the workpiece.
  • They feature high speed of production and they can perform many operations on the workpiece automatically.
  • They allow great uniformity in the parts they manufacture, so that makes it a very useful machine for series production.
  • As they are highly automated, machining centers increase productivity and require less labor, which turns into significant cost savings for the employer.

3. What are the two main types of machining centers?

There is a wide variety of machining centers according to their size, number of axes or features, etc. However, usually, two types are distinguished:

  • The horizontal machining center

It is a numerical control machine useful for application in large pieces that require several parts machined in its surface.

  • The vertical machining center

They are the most efficient machining centers and the most suitable for manufacturing dies, molds or dice. They are cheaper than horizontal and are characterized by high flexibility. There are centers of 3, 4 or 5 axes. The more axes, the greater mobility of cuts and the greater the complexity of machining tasks that these machines can run.

The vertical machining center with a fourth axis, in addition to the three classic movements of the cartesian axes (X, Y, Z), has the option of the rotation control of the workpiece on either axis, that functionality is particularly advisable to work piece surfaces which have cylindrical shapes.

If the machining center has 5 axes, plus all the options described above, the fifth axis can rotate two axes simultaneously. It also allows to perform the rotation on an axis perpendicular while the workpiece is tilted perpendicularly thereto. Therefore a vertical machining center 5 axis is able to perform highly complex functions.

4. What is a vertical machining center?

There are a variety of models on the market of machining centers vertical allowing both machining large pieces and small, either in small amounts or in large series.

Similarly, the interface work this machine cnc is evolving increasingly handling more simple and intuitive.

The vertical machining center is an option to take into account, given its high performance as well as the cost-benefit offered by the investor in machinery.

5.Our range of used machining centers

In CECAMASA we try to have a large stock of machining centers from reputable brands such as Mazak, DECKEL MAHO, AWEA,KONDIA, HERMLE, etc.

Our centers are equipped with leading numerical control systems such as HEIDENHAIN or FANUC, among others.

Among our recent acquisitions, we would like to highlight one, the vertical machining center HERMLE 5 axes, Model C 40 U, ​​which you can see in more detail below.

6.Our recent acquisition: HERMLE 5-axis vertical machining center

Vertical machining center HERMLE 5-axis

It has an adjustable circular table with a diameter of 700 mm that can support up to 1400 kilos load.

The range of rotation of the table (Axis A) is 135 °, of which, are -110º backward and forward of + 25 ° and the range of rotation (C axis) is 360 °.

The travels of the Cartesian axes X, Y, Z are: 850x700x500mm.

The vertical machining center HERMLE is equipped with a tool magazine with 38 stations and a 850 mm wide chip conveyor.

In addition to our wide range of machining centers, spare parts, we are partners of LAGUN, a renowned manufacturer of milling machines and machining centers of high quality, based in the Basque Country which is a company with a long career in the field of machine-tools.

In our section of new industrial machinery, you can find a wide range of vertical machining centers new ones are right now at your complete disposal.

If you're thinking about buying a vertical machining centre and you have doubts about which one would best suit your current or future production needs, please contact us. Our team will be happy to advise you personally to answer all your questions.

Meet our selection of used machines with fast delivery

With nearly four decades of experience behind us, in CECAMASA we have learned that in order to survive and grow in an increasingly competitive market such as the one of the sale of used machineryis not enough to sell used equipment in good conditions, but used machines to report productivity as if they were brand new at a cost and delivery that your customer perceives as reasonable.

And as you can imagine, achieve this perception in the metallurgical market is not an easy task. That is due to the fact that nowadays the profile of the current buyer is more and more demanding.

In addition, easy access to the Internet and digital technologies makes easier to the customer to have at his disposal more relevant information and data to facilitate the acquisition of a greater number of used machines.

To the circumstances described, we must add that our competition is not limited to a regional or national area, it becomes necessary to compete in the sale of used equipment worldwide.

A team of mechanics capable of solving any kind of repair in used machines.

This scenario requires us to work every day to become more efficient and do not neglect any aspect of our technical service,trying constantly to add value to our customer. In this value chain, we are well aware that our team of mechanics plays a key role.

Our team of tecnicians highly qualified, is trained to perform any repair in machines used by leaving them in perfect condition, either mechanical, electronic, pneumatic or hydraulic.

High precision tools: a technology investment absolutely necessary

It is well-known that even the best teams need to make use of the best tools to perform their tasks successfully. That is why in CECAMASA we not skimp on resources and constantly invest in high precision tools to keep us on the forefront of technology.

An example of this are our tools as the ballbar, laser interferometer, squares or regles precision that allow us to carry out restoration work and installation of machines.

They are all investments that we believe absolutely necessary to continue providing a good customer service. The combination of qualified staff and modern tools allows us to offer solutions to our most demanding customers.

We place the assembly and dismantling of used machines in professional hands and leave them in the best possible conditions. Their geometry is verified, we carry out repairs and/or retrofittingsif they are needed. Similarly, we ensure the safety of the machines during their transportation and subsequent delivery.

To satisfy our customers is our top priority, so, you don't need to worry about our used machinery, since you decide to buy our machinery until it is installed in your business, everything is on us.

Find below a repertoire of images of our latest retrofitting works, in that way you would be able to have an idea of ​​how we work with used machines:

1.Zayer 20KF-3000 bed type milling machine

Fresadora Zayer de bancada fija

2. Zayer 30KMU 6000 travelling column milling machine

Fresadora Zayer de columna móvil

Our customers are not only based in our country, we also have an extensive portfolio abroad. Moreover, we have recently sold a LAGUN GBM 42 milling machine to a customer in Finland.
And now the milling machine looks in that way in the facilities of our Finnish customer.

3. Lagun GBM 42 milling machine at the customer's premises

In addition to the sale of machines for international companies, if our customer requests, we offer the possibility of a turnkey service.

It is an integral solution in which our technical team can move to any part of the geography to perform the installation of the machine purchased by the customer, performing all necessary operations to ensure a quality work, taking over even the foundation if considered necessary.

A quick response is essential in the market used machinery

In our facilities of over 4,000 square meters located on the outskirts of Barcelona, ​​in the municipalities of Parets del Valles and Moncada and Reixach, we have a vast range of machines which allows us to offer the following benefits to our customers:

1.Immediate availability of used machines

Those interested in purchasing used machines can visit us at our facilities to see how we work and see for themselves our stock of machinery available for sale.

2.Fast delivery of used machinery

Given that we have most of the machines used in our facilities, the delivery time is greatly reduced.

As you have seen above, in CECAMASA we have a global vision of the business of second-hand industrial machinery and we leave nothing to chance.

Our goal is to have the largest number of satisfied customers and, of course, gain their loyalty, in that way, when they need to reinvest in used machinery, they think of us as their first choice and trust our professionalism again.

If you want to learn more about how we work or have any doubts about the used machines with fast delivery that best fits your current and future production needs, contact us. Our team in CECAMASA will be more than happy to assist you personally and will answer all your questions.

CNC lathe: a precise production tool

CNC lathe CECAMASA: Gemini GHT5 G2

The numerical control lathe, also known as CNC lathe is one of the star products of CECAMASA's removal machinery, along with milling machines and machining centers. Over forty years of experience and expertise in the field of metallurgy have been essential for the development and optimization of this tool, which has proved to be as efficient as necessary in work environments of industrial machinery.

CNC lathe

The numerical control lathe is the theme of this blog. We had long wanted to tell you about this machine and tool used in the machining of revolution parts whose performance can be highly accurate thanks to its controls which uses a specific software.

In this way a CNC lathe can replace functions and tasks routinely performed by other types of lathes, as parallel lathes, automatic lathes and even vertical lathes. Hence their profitability is based on the type of part needed to be machined and the amount of workpieces in a series.

Discovering the advantages of the CNC lathe

In CECAMASA we deeply know the singularities of the CNC lathe and, therefore, its advantages over a conventional lathe.

  1. Fewer staff. A single operator can manage CNC lathes to be able to control the process being carried out according to the instructions marked.
  2. Greater precision. Unlike the conventional lathe, where the results rely heavily on the operator's skills, the CNC lathes provide greater accuracy in the machining operation of parts.
  3. Suitable for large series of parts. Given its characteristics, the CNC lathe is emerging as the most efficient machine for large series, with the extra advantage of being able to execute more complex geometries than a conventional lathe.
  4. Simultaneous cutting. The CNC lathes can also operate simultaneously with different cutting tools.

A wide range of CNC lathes of CECAMASA

The implementation of CNC lathes in the industry is widely favoring economies of scale. In order to provide the most efficient solutions for each type of industry and company in CECAMASA we have a wide range of references in this type of machine tools, among which stands out the GEMINIS lathe, model G2 GHT5 manufactured in 2009 with a distance between centers of 4.000 mm. Among its technical features, just to name a few: it has a swing over bed 1000 mm, swing over cross slide 680 mm, it is in excellent condition and it is equipped with control unit Siemens 810D, 6 bar cooling plus chip conveyor.

For more details, this video shows its features in a clear way and the high performance and possibilities offered by this machine.

CNC Lathes of CEMACASA: only premium brands

The CECAMASA prestigious career has been possible, among other things, thanks to the quality of the tools and machinery offered, counting on domestic and international brands as well.

Regarding lathes, count on the reliability of Geminis lathes, machine tools produced by Goratu S.A. (Company based in the Basque country with a great tradition in manufacturing lathes since 1957), is one of the strong points in our favor.

Regarding the international market, DAEWOO is one of our flagship brands. Its lathe model of slant bed PUMA 400 LMB 2006 is an exceptional machine produced by DOOSAN MACHINE TOOLSa Korean firm leader in the sector with a production of more than 17,000 machines a year. The capacities of this lathe are remarkable:

  • Distance between centres: 2.000 mm
  • Max turning diameter: 700 mm
  • Maximum over cross slide: 560
  • Spindle hole diameter: 120 mm
  • Equipped with a FANUC 21i-TB CNC
  • SMW Autoblock hydraulic chuck
  • Motorized turret
  • C axis
  • Hydraulic steady rest
  • Inner coolant supply
  • Chip conveyor

To know in depth the benefits of the lathe DAEWOO of slant bed, model PUMA 400 LMB from 2006, you can watch the following video:

If what you are looking for is a CNC lathe of quality but with a more modest performance, our recommendation is to go for the MORI SEIKI Model SL-25B. This is one of the most important references among this Japanese brand, which is internationally popular.

  • 1125 mm distance between centres
  • Max diameter over bed 520 mm
  • Max diameter over cross slide 350 mm and spindle diameter 60 mm
  • Equipped with FANUC CNC
  • Chuck Ø 210
  • Turret of 12 positions
  • Tool pre-setter

CECAMASA, Your expert on CNC lathes

In CECAMASA we are at your disposal. With the most efficient products, but also with the necessary advice to properly choose what kind of lathe, from the numerical control lathe, to Geminis lathe, Gurutzpe lathes or universal lathe... it is the most suitable one for your company in order to optimize efficiency, productivity and adaptation to activity. For any questions, feedback or need advice on numerical control lathes or new industrial machinery and spare parts, please contact us.

Recent acquisitions of industrial machinery in CECAMASA: Milling machines and hydraulic presses

Planer ZAYER 20 KF-3000

CECAMASA is a solid company in the sector of industrial machineryBoth used machinery in perfect condition as in new machinery of excellent quality. Throughout the nearly forty years of activity in the metallurgical sector we have managed to adapt to market trends and needs, nationally and internationally.

In this new blog entry we would like to show some of the new additions to our machinery. As a result of the acquisition of two new workshops in the area of ​​Catalonia and the selective purchase of several industrial machines, our stock of used machinery has been substantially increased since our last post. Therefore, the aim of this new post is to show some of these references, especially those for milling machines and presses.

We would like to outline the fact that all our machines have been checked by our professional team of technicians and they are ready for immediate delivery.

Bed type, gantry and mobile column milling machines

CECAMASA currently has more than half a dozen bed type milling machines of well-known brands such as ZAYER, CORREA, SORALUCE and MTE. The high versatility and performance of those top brand milling machines offer a wide range of applications to the companies of the sector of industrial machinery.

In our previous blog post, entitled "Our experience in versatile, reliable and high-precision equipment of milling machines" we talked extensively about our milling machines, especially two large ZAYER:

  • The Zayer KPCU 6000 AR DT a bridge milling machine with a double table system of high performance and high precision for the production of large components. Equipped with a control unit Heidenhain iTNC 530, handwheel Heidenhain HR 410, CNC milling heads axis A / B, internal cooling through the spindle, a tool changer of 100 units, KNOLL cooling system and two chip conveyors.

  • The Zayer 30 KCU 16000 AR, a traveling column milling machine with longitudinal travel of 16.000 mm, cross travel of 1,500 mm and vertical travel of 3,500 mm. Equipped with pick-up head, with handwheel Heidenhain HR 410, tool changer of 100 units, KNOLL cooling system, chip conveyor and a Heidenhain iTNC 530 control unit which allows working with large metal parts.

To the above-mentioned list of excellent Zayer machines, it should be added the acquisition of two bed type milling machines de la marca CORREA: la CORREA A30/30, con unos recorridos en X de 3.000 mm, en Y de 1.200 mm y en Z de 1.040 mm. Equipada con un CNC HEIDENHAIN iTNC-426 PB. Y la fresadora CORREA A30/40, With 4,000 runs in X, Y and Z 1,250 of 1,500 mm. These new additions add to our range of milling existing fixed bed composed of other models of the brand SORALUCE, which are also talked about in our previous post last blog.Por, we want to emphasize in the section used industrial machinery incorporating ZAYER 20 KF-3000A revised and painted router currently looks like new. In the pictures you can see with your own eyes the great work done by our technical and mechanical team.

used industrial machinery Milling ZAYER 20 KF-3000

LOIRE SAFE and MUNARRIZ hydraulic presses

The hydraulic presses are part of our wide range of industrial machines and are ideal to carry out heavy work or manipulate certain materials. This type of presses are equipped with everything needed for reliable and fast mechanical pressing in sectors such as automotive or agricultural.

In CECAMASA currently have two hydraulic presses of the prestigious brand LOIRE SAFE, The largest Spanish manufacturer of hydraulic presses. These models 125 and 500 Tn respectively. We also have hydraulic presses national brand MUNARRIZ.

It is important to know that LOIRE SAFE was acquired by Loire Gestamp in 2011 a benchmark company in the manufacture of automobile components with nearly 100 plants worldwide and which uses hydraulic presses LOIRE to produce parts which are able to meet the high standards of the automotive industry. MUNARRIZ, meanwhile, is a producer of presses based in Navarra with over 20 years of experience that backs its presence in this field and the quality of their machines.

If this article has aroused your curiosity about our range of products, new and used, and you want to know more, contact us and our professional team of technicians will be more than happy to help you.

Our experience in versatile, reliable and high-precision equipment of milling machines

Our experience and track record of 40 years in the business of milling machines currently allows us to advise in the best possible way on the acquisition of equipment of industrial machinery to meet the growing needs of machining, achieving greater customer satisfaction.

In our exclusive range of new and second-hand industrial machinery for the metallurgical sector, we have always placed special emphasis on providing an extensive and versatile portfolio of milling machines of different types: traveling column milling machines, bed type milling machines, bridge type milling machines or universal milling machines, among others.

What will you find in this post?

  1. What are our milling machines for?
  2. A versatile and broad range of milling machines for proper metallurgical performance
  3. Zayer milling machines of large dimensions and capabilities for machining
  4. A highly qualified team for the high performance of your milling machines
  5. Our Soraluce milling machines with high levels of reliability and productivity
  6. A recent acquisition of two new workshops and industrial machinery in stock

1 # What are our milling machines for?

Machine tools are used to create parts with certain shapes, through a machining process thereof, with the use of the cutter, the rotary tool enables to obtain the material thus abrasion as chip removal.

Normally, the milling machine is used to work with metals such as steel or bronze, but it also serves to treat a wide variety of materials such as wood or plastics.

2 # A versatile and broad range of milling machines for proper metallurgical performance

Milling machines are essential for the machining of diverse sectors with demanding requirements and high precision tools.

In CECAMASA we try to cover a versatile and extensive range of models and brands both international and domestic milling machines, paying special attention to the references manufactured in the national territory, as we know from experience that they guarantee excellent results for our customers. We are experts on brands like Zayer, Soraluce, Correa and Lagun.

Since our inception, it has meant a strategic investment for us to have the best equipment of milling machines of the market, adding to this our deep knowledge of technologies numerical control systems of renowned companies like Heidenhain, Fanuc, Fagor, etc.

These devices allow you to copy models digitally designed to the piece, achieving the production of a high number of parts more quickly and with a high level of precision on the material to be processed, because the movements are guided by the model registered in the memory of the milling machine.

3 # Zayer milling machines of large dimensions and capabilities for machining

We are faithful to the milling machines of the renowned brand Zayer for their excellent results. Zayer is a firm located in Vitoria which has been developing milling machines of excellent quality and up to 33 meters in longitudinal travel for more than 60 years.

We currently have in stock several models of Zayer milling machines, among them our two latest acquisitions of milling machines Zayer stand out, as only a few companies of industrial machinery can store them due to their size and capabilities.

We are talking about two models of used machines of extraordinary quality. Find below a couple of videos from which you can get an idea of ​​their physical dimensions and performance:

The milling machine Zayer KPCU 6000 AR DT

It is a gantry milling machine with a double-table system manufactured in 2003, high performance and high precision for the production of large components. It is equipped with a control unit Heidenhain iTNC 530, handwheel Heidenhain HR 410, CNC milling head axis A / B, internal cooling through the spindle, a tool changer of 100 units, cooling system and two KNOLL chip conveyors.

The milling machine Zayer 30 KCU 16000 AR

It is a traveling column milling machine manufactured in 2003 with mobile column head holder on 3 axis: X- axis travel 16,000 mm, Y-axis travel 1.500 mm and Z-axis travel 3,500 mm. Equipped with pick-up of heads. A / B 0,001º- 0.001º 45º milling head. 3 + 2. Boring head 5/500 S. D'Andrea UT also has handwheel Heidenhain HR 410, tool changer of 100 units, KNOLL cooling system, chip conveyor and Heidenhain iTNC 530 control unit which allows working with large metal parts.

It is a milling machine equipped with a control unit Heidenhain iTNC 530 which allows working with large metal parts.

4 # A highly qualified team for the high performance of your milling machines

Being used machinerywe would like to draw to your attention that after their purchase these milling machines have gone through a rigorous technical inspection and retrofitting, if needed, to ensure their perfect condition. Only then it is when we put them on sale with short delivery period as we have most of them stored in our own warehouse.

In CECAMASA we have a team of highly skilled mechanical-electronic technicians capable of transforming used industrial machines into machinery with excellent conditions to achieve high performance of your milling machines. Thanks to this, our milling machines are used machines that are as good as any new industrial machinery.

5 # Our Soraluce milling machines with high levels of reliability and productivity

We would also like to highlight our brand Soraluce references, a world leader brand in large traveling column milling machines.

We currently have in our extensive inventory of used milling machines, two models designed to meet the specific needs of machining with high levels of reliability and productivity: the mobile column milling machine Soraluce FR 14000 and the mobile column milling machine Soraluce FL 5000, both equipped with a Heidenhain iTNC 530 control unit.

We also have other models of the firm Soraluce, within the category bed type milling machines, we currently have a model of the milling machine Soraluce TR 35 and the milling machine Soraluce TA 20.

6 # A recent acquisition of two new workshops and industrial machinery in stock

In addition to the above-mentioned Soraluce and Zayer milling machinesCECAMASA has recently carried out a major operation to purchase two workshops located in the region of Catalonia, which has allowed us to have new industrial machinery with immediate availability for our customers.

This recent investment has resulted in an imminent acquisition of a Correa milling machine which falls into the category of bridge type milling machines, in particular the FP 40/40S model and a vertical machining centre AWEA.

Also within the make Correa milling machines, we have the model of a bed type milling machine Correa A30 / 40the bed type milling machine Correa A10the mobile column milling machine Correa L30/43 and the gantry milling machine Correa FP 60.

As you already know, there is a number of issues that any professional in our industry bears in mind in order to choose a milling machine. It is important to take into account the most appropriate type depending on the use that is going to have, what materials they want to work, the available budget, the required technical specifications, cutting techniques or the dimensions of the place where the machine will be located.

To address all these points and more complex issues to resolve, in CECAMASA we have plenty of experience in all kinds of tools, advanced technologies and staff involved in the success of each project.

As we have seen, the milling machines have become an indispensable machine in the metallurgical sector. Contact us to personally get advice on the most suitable milling machine to help you make the best jobs in your field.

CECAMASA will participate in major trade fairs in the metalworking sector in 2018

CECAMASA in the metallurgical sector shows 2018

CECAMASA's 200 square meters owned stand in FITMAQ 2017

In this new post we explain in detail our participation in leading professional events of the industrial machinery with the following headlines:

  1. A brief review of the events of the industrial machinery of 2017
  2. CECAMASA will be present at the BIEMH, MetalMadrid and Advanced Factories 2018
  3. CECAMASA commitment to emerging technological investment of the fourth industrial revolution
  4. Our main objective at fairs of the metallurgical sector: to respond and meet the demands of the challenging metallurgical market

1 # A brief review of the events of the industrial machinery of 2017

We would like to begin with a brief assessment of the professional events in 2017, a year of great activity, marked by a hectic and full schedule of fairs that have revolved around the sector of the industrial machinery.

In 2017 CECAMASA was present at FITMAQ, a fair trade benchmark in the world of used machinery at national level, with a stand of 200 square meters. We have also participated in MetalMadrid and Advanced Factories through our sales offices.

Based on the good results achieved in previous editions, this year our intention is to be present again at Advanced Factories and MetalMadrid with some of our delegates and through our main represented brands.

2 # CECAMASA will be present at the BIEMH, MetalMadrid and Advanced Factories 2018

This 2018, we expect a BIEMH with solutions and new technologies to consolidate production processes of the fourth industrial revolution in the market of industrial machinery.

Its 30th edition will be focused on an unprecedented technological offer, industrial machines that revolutionize production processes and interconnected processes that multiply their performance, quality and value. The aim of the International Biennial Machine Tool BIEMH- is to be positioned at the avant-garde of the industry 4.0.

A total of 1,510 exhibiting firms from 21 countries will attend the trade fair which will take place from 28 May to 1 June at the Bilbao Exhibition Center (BEC). This edition has already catapulted itself as the most ambitious Biennial of the last ten years, as confirmed by Xabier Basañez, CEO of BEC.

At this fair you will find us on the stands of our represented brands to advise on our industrial machinery to all customers who are looking for greater productivity, innovation and the latest technology.

Klinsman is one of the most worldwide recognized manufacturers of shears and pressbrakes , ranging from more conventional machines to cnc pressbrakes.

We are distributors of the brand in Spain, Portugal and part of South America since 2000. Over these years we have seen from first hand that their machines offer high performance, high rigidity and excellent reliability at work.

Juaristi is a reference in the sector of machine-tool since 1941, when it began its activity within the design and manufacture of a wide range of boring machines and milling machines of high precision.

Juaristi has outstanding facilities settled in the Basque Country and stands out because it is strongly focused on the innovation of the development of new machines designed as industrial solutions with complete automation. That has made possible that Juaristi has increased its market share and has consolidated internationally.

In summary, we are talking about a company with vast experience in milling machines and boring machines with an excellent acceptance in the market of industrial machinery.

Equitop is a company in the constant pursuit of excellence in advanced technology equipment. Its great concern prompts them to improve the design, manufacturing and quality control.

They are manufacturers of a wide range of top quality machines, among them their manual grinders , automatic 3-axis grinding machines, surface grinding machines with digital and CNC surface grinders should be highlighted. All of them machines with a remarkable number of patents and certifications that guarantee its unquestionable competitiveness and market leadership within the industrial machinery.

3 # CECAMASA commitment to emerging technological investment of the fourth industrial revolution

In MetalMadrid 2018 because it is the only annual industry fair in the Center Area where customers engaged in industrial automation, robotics, welding or components for industrial machinery gather.

The next 26 and 27 September more than 500 industrial companies and 10,000 visitors will attend the Feria de Madrid for updates in automation and robotics in an area with 15% more exhibition space than last year.

In addition to MetalMadrid 2018, it is for us a "must" attendance Advanced Factories 2018 which will be held from 13 to 15 March at the CCIB in Barcelona. This fair, which aims to turn Barcelona into the European capital of industry 4.0, will bring together the great leaders in the field of industrial automation and digitization.

The imminent release of Advanced Factories expects more than 10,000 delegates and visitors in search of new technological solutions driven by artificial intelligence, the internet of things, additive manufacturing or industrial cybersecurity.

Both fairs are excellent opportunities to present our technological investment, The latest innovations in industrial automation equipment and to learn first hand the technologies that emerge from the fourth industrial revolution or industry 4.0.

4 # Our main goal at fairs of the metallurgical sector: to respond and meet the demands of the challenging metallurgical market

CECAMASA in the metallurgical sector shows 2018With the attendance at these fairs and other events of the sector, our main purpose is to meet the emerging needs of potential customers and experts in the world of machining centres, milling machines and sheet metal deformation.

In order to meet the requirements of this demanding market, we would like to present in person our milling machines, machining centers and cnc lathes within the category of used machines and the shears and pressbrakes of the brand Klinsmann comprising our extensive range of new industrial machinery.

These remarkable professional events also bring us a deep understanding of technological advances in the metallurgical sector that allows us to analyze first hand the needs of the current market in order to advise our clients on the acquisition of the most suitable new and second-hand industrial machinery.

From CECAMASA we hope to see you all in the main fairs in the metalworking sector we have just around the corner. If you want to know more about our participation in fairs, contact us and we will provide you with further details.