STANKO 1M63B 3000 lathe
Information of the used STANKO 1M63B 3000 conventional lathe
Among the wide range of manufacturers of conventional lathes, STANKO is a manufacturer in Eastern Europe which has always been characterized by the great robustness of its machines. STANKO lathes feature a large cast iron and a large guide width. This second-hand conventional lathe STANKO 1M63B 3000 has a distance between centers of 3000 mm, which allows the machining of parts of up to 3 meters. It also has a swing over bed of 630 mm. Another important aspect to highlight is the fact that this second-hand universal lathe is compliant with CE regulations and it is equipped with a FAGOR digital. The machine is in perfect mechanical condition.
Despite being a conventional lathe, it is a high performance machine in terms of machining geometry. It is an ideal lathe for maintenance, for heavy parts, just to name some of its wide applications in the metalworking sector.
Technical features of the second-hand STANKO 1M63B 3000 universal lathe
Reference: | 211-R047 | |
Distance between centers: | 3000 mm | |
Swing over bed: | 630 mm | |
Swing over cross slide: | 350 mm | |
Swing over bed without gap: | 900 mm | |
Gap length: | 300 mm | |
Spindle hole diameter: | 72 mm | |
Speeds: | 10 to 1250 rpm | |
Main motor power: | 20 CV | |
Approx machine weight: | 6300 kgs | |
Machine dimensions: | 5100x1780x1490 mm | |
Equipped with: | ||
Digitals: | FAGOR | |
Saddle: | motorized | |
Chuck: | Universal 3 jaws Ø 415 mm | |
Sets of jaws: | 4 | |
Steady rest: | Ø 350 mm |
Need more information about this second-hand STANKO 3000 1M63B conventional lathe?
Contact us and we will inform you without any commitment on this STANKO 1M63B 3000 conventional lathe . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, CNC lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GURUTZPE SUPER BT 600/4000 lathe
Technical characteristics of the used universal GURUTZPE SUPER BT
Reference: | 211-R049 | |
Distance between centers: | 4000 mm | |
Swing over bed: | 1200 mm | |
Swing over cross slide: | 845 mm | |
Swing over bed without gap: | 1570 mm | |
Gap length: | 500 mm | |
Spindle hole diameter: | 100 mm | |
Speeds: | 2,8 to 400 rpm | |
Main motor power: | 30-40 CV | |
Approx machine weight: | 15400 Kgs | |
Machine dimensions: | 7385x2040x2000 mm | |
Equipped with: | ||
Saddle: | motorized | |
Chuck: | 4 independent jaws 1200 mm Ø | |
Steady rest: | Yes |
Need more information about this second-hand GURUTZPE SUPER BT conventional lathe?
Contact us and we will inform you without any commitment on this GURUTZPE SUPER BT conventional lathe . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, CNC lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
SIDERIC – DELFOS – HEDISA – S/M drill
Technical features of used tabletop drills
Brands: DELPHI – SIDERIC – HEDISA – S/M – ARA-MON
Ø drill bit: 10, 13 and 16 mm
More info:
Need more information about these second-hand tabletop drills?
Contact us and we will inform you without any commitment on these tabletop drills. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
SCHULER winder
Technical features of the used SCHULER AHR 180/2 winder and planner
Reference: | 143-J011 | |
Max coil: | 1200 mm | |
Inner coil: | 360-510 mm | |
Metal sheet width: | 180 mm | |
Metal sheet thickness: | 2 mm | |
Coil weight: | 1300 Kgs | |
Unwinding speed: | 4-30 m / min | |
Engine power: | 0,75 Kw | |
Approx machine weight: | 850 Kgs | |
Machine dimensions: | 2000x1000x1800 mm |
Need more information about this second-hand SCHULER AHR 180/2 winder and planner?
Contact us and we will inform you without any commitment on this winder and planner SCHULER AHR 180/2. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
LAGUN FTV-4 milling machine
Information on the second-hand turret LAGUN FTV-4 milling machine
The machine tool manufacturer LAGUN is one of the companies with the most tradition and history in Spain. LAGUN started manufacturing universal milling machines and turret milling machines. To this day it carries on selling machines of this type.
The LAGUN FTV-4 turret milling machine from our stock of used machinery is an ideal machine for simple machining, that is, not for making series. Machining that requires agility and quality in milling.
Highlight of this second-hand milling machine several aspects. First, it features a continuously variable head. Thus, with a lever, the rpm of the spindle rotation can be varied. In this way, the revolutions can be increased or decreased depending on the milling work to be carried out. Also, highlight that head is rotatable, being able to work to degrees. And finally, to point out that the milling machine is equipped with FAGOR read-outs on the 3 axes.
Taking into account all the above-mentioned, this turret milling machine is ideal for any company in any sector that needs to carry out machining operations. That is, the wind sector, aeronautics, automotive sector, mining, just to name a few.
Technical characteristics of the used LAGUN FTV-4 turret milling machine
Reference: | 072-Y015 | |
Table: | 1372x280 mm | |
X-axis traverse: | 800 mm | |
Y-axis traverse: | 345 mm | |
Z-axis traverse: | 400 mm | |
Ram traverse: | 570 mm | |
Quill traverse: | 127 mm | |
Head moves right and left: | 90º | |
Head tilts from to back: | 45º | |
Spindle taper: | Spindle cone ISO 40 | |
Speed range: | 50-3750 (50 Hz) | |
Feeds per spindle revolution: | 0.04-0.08-0.16 mm | |
Chromed quill diam: | 85,70 mm | |
Min/Max distance from spindle center to body: | 130-700 mm | |
Max distance from spindle to table: | 415 mm | |
Number of feedrates: | 12 | |
Longitudinal and cross feedrate: | Min 20 mm Max 920 mm | |
Vertical feedrate: | Min 6 mm Max 276 mm | |
Rapid traverse (X,Y/Z): | 2600 mm / 800 mm | |
Main spindle: | 4 HP | |
Feed motor: | 1.50 HP | |
Coolant pump: | 0.08 HP | |
Approximate machine weight: | 1450 kgs | |
Equipped with: | ||
FAGOR read-outs (X,Y,Z): | Yes | |
1 set of cone - collet chuck holder: | with 1 collet chuck holder |
Need more information on that second-hand LAGUN FTV-4 milling machine?
Contact us and we will inform you without any commitment on this turret milling machine LAGUN. If you wish, you can also visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, conventional lathes, cnc lathes, bending machines, shears, folding machines, grinding machines, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
HERMLE C800 P machining centre - 075/P042
Technical features of the second-hand HERMLE C-800 P vertical machining center
Table: 800 x 500 mm
Max weight allowed on table: 250 Kgs
Travels
- X-axis: 800 mm
- Y-axis: 500 mm
- Z-axis: 500 mm
Spindle taper: HSK A63 equivalent (ISO 40)
Spindle speed: 20-15000 r.p.m.
Spindle Ø: 70 mm
Tool changer 30 units
Spindle power: 10.5 KW
Power: 400 V, 50 Hz.
Machine dimensions: 2930 x 3260 x 2210 mm
Machine weight: 8500 kg.
Year: 1998
Equipped with:
- CNC: HEIDENHAIN TNC 430
- Pivot table rotopallet PEISELER
- Inner coolant supply 40 bar
- Chip conveyor
- Hydraulic clamping piece
- Coolant integrated cabinet
- Prepared for:
- Breakage probe
- Tool centering probe
- Piece centering probe
Hermle C-800 P MACHINING CENTRE
DECKEL MAHO machining center - 075/R002
Technical features of the second-hand DECKEL MAHO DMU 50 Evolution vertical machining center
Table 800 x 480 mm
Travels:
- X : 500 mm
- Y : 420 mm
- Z: 380 mm
Spindle taper ISO 40
Spindle speed 18000 rpm
Tools charger 32 units
Advance work 0-20000 mm/min
Rapid advances 50000 mm/min
Machine weight 5,800 Kgs.
Year 2000.
Equipped with:
- CNC HEIDENHAIN TNC 430
- Electronic hand-wheel
- Optical rules.
DAHLIH MCV 1450 machining center
Information about the used DAHLIH MCV 1450 vertical machining center
The vertical machining center DAHLIH MCV 1450 It is considered one of the best as regards machine manufactured in Taiwan. Features large travels on the Y axis and the Z axis with a table of 1600 mm and ISO 50 cone with a spindle motor 30 HP, making this machining center a heavy machine. Moreover, this vertical machining center has a spindle ISO 50 that can reach 6,000 rpm. Notably machine DAHLIH is equipped with internal cooling, chip conveyor and chain magazine 32 tools.
Technical features of the used DAHLIH MCV 1450 vertical machining center
Reference: | 075-R044 | |
Table: | 1600 x 880 mm | |
Max weight on table: | 2000 Kgs | |
X-axis traverse: | 1450 mm | |
Y-axis traverse: | 750 mm | |
Z-axis traverse: | 750 mm | |
Spindle taper: | ISO-50 | |
Spindle speed: | 6.000 r.p.m. | |
Spindle motor: | 30 HP | |
Year of retrofitting: | 2020 | |
Equipped with: | ||
Control: | FANUC 18-M | |
Tool Changer: | 32 tools chain | |
Coolant supply: | internal | |
Chip conveyor: | Yes | |
Cutting oil tank: | with paper filter |
Need more information about this second-hand DAHLIH MCV 1450 machining center?
Such a used machine is located at our facilities and it is ready for immediate delivery as it has been revised and completely retrofitted. Both, mechanically and electronically. You can also check in our facilities that the machine has a geometry 0.02 maximum error in each of its axes. Also we encourage you to watch the video of the machine.
Contact us and we will inform you without any commitment on this DAHLIH MCV 1450 machining center. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, cnc lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Bridge type milling machines
Find below our selection of second-hand bridge type milling machines which includes brands as relevant as Zayer milling machines or Correa milling machines. We fully trust these firms based on our knowledge of this type of used machinery for the good results and excellent benefits offered to our customers.
Backed by 40 years of experience and expertise in the market of milling machines and also by an experienced team of mechanical-electronic technicians who are able to transform used milling machines into machinery with excellent conditions for immediate use.
Contact us and our team will personally advise you on the most suitable model of bridge type milling machine in order to achieve the best performance.
Drills
The drills are of extraordinary quality tools that perform machining chip removal, through holes in certain materials. However, they can also be used for other functions, Boring machine or for threading.
In our wide range of second hand drills, we have radial, column or desktop drills, among others.
The radial drill has a head mounted on a horizontal arm on which you can move and can take various movements.
The column drillas its name suggests, has a column for supporting the head. It is a tool very useful in machining processes by chip removal to carry out drilling. Its handling is relatively simple and ensures impeccable finishes.
The multiple head drills allow the realization of several holes at once.
Our extensive inventory stock consists of well-known brands as IRSA, IBA, FORADIA, ERLO, IBARMIA, SORALUCE, SIDERIC, DELFOS, etc.
For more information or details about our drills, contact us. and our professional team will personally answer all your questions.