LAGUN milling machine - 073/P048
Moving column milling machine LAGUN
Model GML 6
Travels:
- X 6000 mm
- Y 1500 mm
- Z 3000 mm
Cone ISO 50 DIN 69871/A
Spindle speed 3000 r.p.m.
Power head (S1 / S6): 37/46 KW
Overall height machine 5300 mm.
Machine ON 500 hours.
Machine working 260 hours.
Year 2011
Equipped with:
- CNC HEIDENHAIN iTNC 530 HSCI
- Hand-wheel.
- Automatic Huron head 2.5º-2.5º
- Table 6000 x 2500 x 300 mm.
- Ready for the 4th axis
- External tooling cooling.
- ZF gearbox with 2 speed ranges.
- NIVELL precision levels (Swiss)
- Piece probe Renishaw RMP 60.
- Main spindle orientation (rigid tapping).
- Pedal for clamping/unclamping the tool.
- Linear guides in the X, Y, Z axis.
- Rack and pinion with double motor in axis X.
- Ballscrews on the axis Y, Z.
- Uptake linear scales on the X, Y, Z axis.
- Inner cooling of 10 bars through the main axis.
- Cabin for the operator in the column.
- Control panel in the cabin.
- RS 232 C + Ethernet.
SORALUCE TA-20 milling machine
Information about the used SORALUCE TA-20 bed type milling machine
Among the three SORALUCE series, the TA series is the lightest, but this does not mean that it is the worst machine. Since this fixed bed milling machine provides a high speed of axis translation with linear guide or guide of skates, guide that has been completely rebuilt. The machine has been painted respecting the original colors and, after carrying out an exhaustive revision of the same, it is in a geometry of 2 hundredths. One of the important features of this milling machine is its perimeter fairing, also including a chip extractor. It has HEIDENHAIN numerical control and HEIDENHAIN HR-410 electronic handwheel. Its delivery status is immediate.
Technical features of the used SORALUCE TA-20 bed type milling machine
Reference: | 073-S023 | |
Table: | 2000 x 800 mm | |
Maximum weight on table: | 4.000 Kgs | |
X-axis traverse: | 2.000 mm | |
Y-axis traverse: | 800 mm | |
Z-axis traverse: | 800 mm | |
Spindle taper: | DIN-697 871-A | |
Spindle speed: | 3.000 r.p.m. | |
Main spindle motor power: | 22 kw | |
Machine weight: | 9,000 kgs | |
Equipped with: | ||
Control: | HEIDENHAIN TNC 426 | |
Head: | Manual | |
Splash guard: | Full-enclosure | |
Chip conveyor: | Yes |
Need more information about this second-hand SORALUCE TA-20 bed type milling machine?
Contact us and we will inform you without any commitment on this fixed bed milling machine SORALUCE TA-20. If you wish, you can visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, bending machines, grinding machines, shears, EDM, etc.
cecamasa@cecamasa.com
+34 935 730 225
LAGUN FTV-4 milling machine
Information on the second-hand turret LAGUN FTV-4 milling machine
The machine tool manufacturer LAGUN is one of the companies with the most tradition and history in Spain. LAGUN started manufacturing universal milling machines and turret milling machines. To this day it carries on selling machines of this type.
The LAGUN FTV-4 turret milling machine from our stock of used machinery is an ideal machine for simple machining, that is, not for making series. Machining that requires agility and quality in milling.
Highlight of this second-hand milling machine several aspects. First, it features a continuously variable head. Thus, with a lever, the rpm of the spindle rotation can be varied. In this way, the revolutions can be increased or decreased depending on the milling work to be carried out. Also, highlight that head is rotatable, being able to work to degrees. And finally, to point out that the milling machine is equipped with FAGOR read-outs on the 3 axes.
Taking into account all the above-mentioned, this turret milling machine is ideal for any company in any sector that needs to carry out machining operations. That is, the wind sector, aeronautics, automotive sector, mining, just to name a few.
Technical characteristics of the used LAGUN FTV-4 turret milling machine
Reference: | 072-Y015 | |
Table: | 1372x280 mm | |
X-axis traverse: | 800 mm | |
Y-axis traverse: | 345 mm | |
Z-axis traverse: | 400 mm | |
Ram traverse: | 570 mm | |
Quill traverse: | 127 mm | |
Head moves right and left: | 90º | |
Head tilts from to back: | 45º | |
Spindle taper: | Spindle cone ISO 40 | |
Speed range: | 50-3750 (50 Hz) | |
Feeds per spindle revolution: | 0.04-0.08-0.16 mm | |
Chromed quill diam: | 85,70 mm | |
Min/Max distance from spindle center to body: | 130-700 mm | |
Max distance from spindle to table: | 415 mm | |
Number of feedrates: | 12 | |
Longitudinal and cross feedrate: | Min 20 mm Max 920 mm | |
Vertical feedrate: | Min 6 mm Max 276 mm | |
Rapid traverse (X,Y/Z): | 2600 mm / 800 mm | |
Main spindle: | 4 HP | |
Feed motor: | 1.50 HP | |
Coolant pump: | 0.08 HP | |
Approximate machine weight: | 1450 kgs | |
Equipped with: | ||
FAGOR read-outs (X,Y,Z): | Yes | |
1 set of cone - collet chuck holder: | with 1 collet chuck holder |
Need more information on that second-hand LAGUN FTV-4 milling machine?
Contact us and we will inform you without any commitment on this turret milling machine LAGUN. If you wish, you can also visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, conventional lathes, cnc lathes, bending machines, shears, folding machines, grinding machines, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
SORALUCE FR 14000 milling machine - 073/Q102
SORALUCE FR 14000 mobile column milling machine
Travels
- X-axis: 14.000 mm.
- Y-axis: 1.500 mm.
- Z-axis: 3.600 mm.
Spindle cone: ISO-50
Speed range: 20-3000 rpm
Feedrate: 2-5000 mm/min
Rapid traverse (X / Z-Y): 10.000 / 15.000 mm/min
Base length: 16.800 mm
Base width: 1400 mm
Power: 37 kW
Year: 2012 retrofitted
Equipped with:
- CNC: HEIDENHAIN iTNC 530
- Milling head: Automatic 2.5º- 2.5º
- 4 tables type STÖLLE 3000 x 1500 mm (each unit)
- Operator cabin with elevation
- Inner coolant supply 25 bar
- Chip conveyor
SORALUCE FR 14000 milling machine
CORREA milling machine - 073/S017
Mobile column milling machine CORREA
Model AXIA 70
Table 6.600 x 1.140 mm
Travels:
- X 7.000 mm
- Y 1.250 mm
- Z 1,500 mm
Spindle Taper ISO 50
Spindle speed 6000 r.p.m.
2 speeds, rapid advances in X / Y / Z 30 m / min
Main motor 30 KW
Total power 59 kW
Machine dimensions 11,900 x 5,170 x 4,225 mm
Weight 40 tn
Year 2007
Equipped with:
- CNC SIEMENS 840 D
- Electronic hand-wheel
- Tool charger ATC 40 units.
- Automatic head UAD 6,000 r.p.m. 0.02° / 0.02°
- Full enclosure
- Coolant through the spindle 30 bar
- Chip conveyor.
Juaristi
Boring and Milling Machines
JUARISTI defines itself as a company that provides "premium solutions for machining operations." Its catalog covers a wide range of configurations of boring machines, milling machines and multifunction turning centers. Juaristi machines stand out for their reliability, accuracy and robustness. They always try to involve the customer from the purchasing process to the after-sales service. Like CECAMASA, Juaristi offers projects of turn-key solutions, which adds value to the customer. Juaristi was founded in 1941 and since then it has made great contributions to the machine-tool . It produced the first NC machine in Spain in 1974 or the first boring and milling center with a central head in 1986. Those are just a few examples of the achievements of that great company. The key of its success lies in its effort to improve and its commitment with quality. For this reason Juaristi has consolidated its position in the market and has achieve to sell over 6000 machines around the world. In fact, 95% of its turnover is thanks to its exports. That high figure highlights its global scope. Moreover, the commercial activity is present in more than 40 countries.
High precision solutions offered by Juaristi machinery have applications in the aerospace, energy and rail sector, just to name a few. Furthermore, the high metal removal capacity and finishes of their machines make them suitable for the mold and die sector. Machining solutions of Juaristi have also found market in sectors such as construction machinery and the pharmaceutical sector.
Juaristi can adapt to the most demanding needs and their engineers work with an attitude that they describe as "artisanal". They try to take care of every detail, in that way, the customer obtains the maximum performance from their machine tools.
Bed type milling machines
Find below our range of second-hand bed type milling machines including such prominent brands as ZAYER, SORALUCE or CORREA among many others as MTE, LAGUN, CME and ANAYAK. All of them premium brands present in our machinery and which offer high performance and meet the requirements of both, domestic and international, customers.
The milling machines are emerging as one of our flagship products. Our extensive experience in the market supports us and allows us to best advise on the acquisition of used machinery of high quality. Our used milling machines have been thoroughly checked by our team of experts to reach the customer in optimal conditions, as if they were brand new.
Contact us and our staff will be more than happy to advise you on the bed type milling machine that best fits your real needs.