+ 34 935 730 225 
FACCIN 4HEL 3139 plate bending machine
Technical characteristics of the second-hand FACCIN 4HEL 3139 4-roller hydraulic plate bending machine
| Reference: | 020-A029 | |
| Max bending: | 3100 mm | |
| Bending capacity: | 25 mm | |
| Pre-bending capacity: | 20 mm | |
| Upper roller Ø: | 390 mm | |
| Lower roller Ø: | 370 mm | |
| Side rollers Ø: | 295 mm | |
| Power: | 40 HP | |
| Approx machine weight: | 19.000 kgs | |
| Machine dimensions: | 6000x2120x2000 mm | |
| Year: | 2001 | |
| Equipped with: | ||
| Digital positioning rollers | ||
| CE standards |
Do you need more information about this second-hand FACCIN plate bending machine with 4 rollers?
Contact us and we will inform you without any commitment on this 4 roller plate bending machine . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GEMINIS GHT4 720×4000 lathe
Technical characteristics of the second-hand GEMINIS GHT4 720×4000 cnc lathe
| Reference: | 218-B001 | |
| Distance between centers: | 4000 mm | |
| Height centers: | 366 mm | |
| Max swing over bed: | 720 mm | |
| Swing over cross slide: | 470 mm | |
| Bed width: | 430 mm | |
| Main spindle hole diam: | 104 mm | |
| X-axis rapid feed: | 8 m/min | |
| Z-axis rapid feed: | 8 m/min | |
| Main spindle nose: | DIN 55027-11 | |
| Speed range: | 2 | |
| Spindle speed: | 0-335 rpm / 0-1600 rpm | |
| Quill diameter: | 100 mm | |
| Quill travel: | 220 mm | |
| Main spindle motor power: | 17 kW | |
| Year: | 2000 | |
| Equipped with: | ||
| Control: | FAGOR 8055 | |
| FORKARDT hydraulic plate: | Ø 360mm (3 jaws) | |
| Manual Turret: | 2 positions | |
| Chip conveyor: | Yes | |
| 1 steady rest: | Ø max 340mm | |
| 1 steady rest: | Ø max 200mm | |
| 2 rotary points, levelers and several sets of jaws |
Do you need more information about this second-hand GEMINIS GHT4 720×4000 cnc lathe?
Contact us and we will inform you without any commitment on this GEMINIS cnc lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
CHEVALIER 2552 VMC L machining center
Technical characteristics of the second-hand CHEVALIER 2552 VMC L machining center
| Reference: | 075-A034 | |
| Table: | 1450x635 mm | |
| Max weight on table: | 1200 kgs | |
| Longitudinal traverse (X-axis): | 1300 mm | |
| Cross traverse (Y-axis): | 635 mm | |
| Vertical traverse (Z-axis): | 635 mm | |
| Main motor power: | 20 Kw | |
| Spindle taper: | BT-40 | |
| Speed range: | 80-8000 rpm | |
| Distance from the main axis to the table: | 685 mm | |
| Feedrate: | 1-7600 mm/min | |
| Rapid traverses (X,Y): | 30 m/min | |
| Rapid traverses (Z): | 18 m/min | |
| Approximate machine weight: | 7100 Kgs | |
| Machine dimensions: | 2701x3348x2638 mm | |
| Year: | 2007 | |
| Equipped with: | ||
| Control: | Heidenhain iTNC 530 | |
| Electronic handwheel: | HR410 | |
| Tool magazine: | 24 tools | |
| Chip conveyor: | Yes | |
| Internal coolant supply: | Yes |
Do you need more information about this second-hand CHEVALIER 2552 VMC L machining center?
Contact us and we will inform you without any commitment on this CHEVALIER machining center. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, cnc lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Klinsman press brake
Technical characteristics of the semi-new KLINSMAN 125/3200 hydraulic press brake
| Reference: | 130/KLINSMAN | |
| Pressing force: | 125 Tn | |
| Working length: | 3200 mm | |
| Distance between frames: | 2600 mm | |
| Throat depth: | 320 mm | |
| Engine power: | 7,5 Kw | |
| Approx machine weight: | 8200 Kgs | |
| Machine dimensions: | 3300x1570x2470 mm | |
| Equipped with: | ||
| Control E21: | 2 axes | |
| Multiple mouth dies | ||
| Punch |
Do you need more information about this second-hand KLINSMAN 125/3200 hydraulic press brake?
Contact us and we will inform you without any commitment on this KLINSMAN hydraulic press brake. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GEMINIS GT5 G2-1200×3000 lathe
Technical characteristics of second-hand GEMINIS GT5 G2-1200×3000 cnc lathe
| Reference: | 218-A028 | |
| Distance between centers: | 3000 mm | |
| Max swing over bed: | 1200 mm | |
| Max swing over slide: | 850 mm | |
| Spindle hole diameter: | 160 mm | |
| Speed range: | 0-1400 rpm | |
| Main motor: | 30 / 37 Kw | |
| Weight approx.: | 12 Tn | |
| Year: | 2013 - Commissioning in 2014 | |
| Equipped with: | ||
| Control: | FAGOR 8065 | |
| 3 jaw universal chuck: | Ø 630 mm | |
| 4 independent jaw chuck: | Ø 800 mm | |
| Automatic turret: | SAUTER 4 stations | |
| Chip conveyor: | Yes | |
| 1 steady rest: | Max 410 - Min 40 mm | |
| 1 steady rest: | Max 700 - Min 400 mm |
Do you need more information about this second-hand GEMINIS GT5 G2-1200×3000 cnc lathe?
Contact us and we will inform you without any commitment on this GEMINIS cnc lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GURUTZPE SUPER-A lathe
Technical characteristics of the second-hand GURUTZPE SUPER-A universal lathe
| Reference: | 211-A027 | |
| Distance between centers: | 3000 mm | |
| Max swing over bed: | 1000 mm | |
| Max swing over slide: | 710 mm | |
| Ø without gap: | 1400 mm | |
| Gap length: | 410 mm | |
| Main spindle hole diam: | 258 mm | |
| Speeds: | 16, 9 a 500 rpm | |
| Automatic advance: | in rotating turret | |
| Voltage: | 380/660 | |
| Engine power: | 15 CV | |
| Approx machine weight: | 7800 kgs | |
| Machine dimensions: | 5500x2100x2200 mm | |
| Equipped with: | ||
| FAGOR digital readouts: | 2 axes (three rulers) | |
| 4 independent jaw chuck: | Ø 800 mm | |
| 1 steady rest: | max Ø 400 mm | |
| 1 steady rest: | max Ø 600 mm | |
| 1 rotary point |
Do you need more information about this used GURUTZPE SUPER-A universal lathe?
Contact us and we will inform you without any commitment on this Gurutzpe lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, CNC lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GEMINIS GE-1200 lathe
Technical characteristics of the second-hand GEMINIS GE-1200 universal lathe
| Reference: | 211-A024 | |
| Distance between centers: | 4000 mm | |
| Swing over bed: | 1260 mm | |
| Swing over slide: | 870 mm | |
| Swing over gap: | 1600 mm | |
| Gap length: | 430 mm | |
| Speeds | ||
| Low speed range: | 2,24-450 rpm | |
| Standard speed range: | 2,80-560 rpm | |
| High speed range: | 3,50-710 rpm | |
| Tailstock quill diameter: | 150 mm | |
| Tailstock quill adjustment: | 275 mm | |
| Total power required: | 30 kW | |
| Approx machine weight: | 11,63 Tn | |
| Machine dimensions: | 7500x2050x2000 mm | |
| Equipped with: | ||
| 4 independent jaw chuck: | Ø 1200 mm | |
| Tailstock: | Yes | |
| 1 boring bar: | Ø 120 mm x 900 mm | |
| 1 boring bar: | Ø 120 mm x 1100 mm | |
| 1 steady rest: | 100-535 mm | |
| 1 steady rest: | 500-800 mm |
Do you need more information about this used GEMINIS GE-1200 universal lathe?
Contact us and we will inform you without any commitment on this GEMINIS lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, CNC lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
ERLO TCA-50 drill
Technical characteristics of the second-hand ERLO TCA-50 column drill
| Reference: | 191-A022 | |
| Table: | 550x550 mm | |
| Drill capacity: | 50 mm | |
| Tiltable rotating table: | Yes | |
| Clutch of spindle feed: | Mechanic | |
| Speeds: | 9, from 45 up to 1115 | |
| Drilling feeds: | 0,08-0,16-0,24-0,35 | |
| Power: | 3 kW | |
| Equipped with: | ||
| Automatic advance | ||
| Cutting oil pump | ||
| CE standards |
Do you need more information about this second-hand ERLO TCA-50 column drill?
Contact us and we will inform you without any commitment on this used ERLO drill. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
HIDROGARNE Press
Technical features of the used HIDROGARNE SD-80 hydraulic press
| Reference: | 142-A023 | |
| Max force: | 80 Tn | |
| Engine power: | 3 kW | |
| Working speed: | 3.8 mm/s | |
| Return speed: | 4.7 mm/s | |
| Maximum pressure: | 320 bar | |
| Piston stroke: | 250 mm | |
| Frontal light: | 1050 mm | |
| Lateral light: | 210 mm | |
| Max vertical light: | 1020 mm | |
| Table light: | 225 mm | |
| Frontal total: | 1530 mm | |
| Lateral total: | 980 mm | |
| Total height: | 2275 mm | |
| Weight: | 690 Kg |
Do you need more information about this second-hand HIDROGARNE SD-80 hydraulic press?
Contact us and we will inform you without any commitment on this hydraulic press. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, cnc lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
DAEWOO PUMA CT250 Lathe
Technical features of second hand DAEWOO PUMA 250CT cnc lathe
| Reference: | 218-A018 | |
| Distance between centers: | 650 mm | |
| Max swing over bed: | 570 mm | |
| Max swing over slide: | 420 mm | |
| Spindle hole diameter: | 77 mm | |
| X-axis travel: | 250 mm | |
| Z-axis travel: | 680 mm | |
| Speed: | 3500 rpm | |
| Approx machine weight: | 4240 kgs | |
| Year: | 2000 | |
| Equipped with: | ||
| Control: | FANUC 21T | |
| 3-jaw chuck: | Ø 250 mm | |
| Turret: | 10 stations | |
| Chip conveyor: | Yes |
Do you need more information about this used DAEWOO PUMA 250CT cnc lathe?
Contact us and we will inform you without any commitment on this DAEWOO lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
