AJIAL press brake
Technical characteristics of the second-hand AJIAL hydraulic press brake
Reference: | 130/B040 | |
Pressing force: | 90 Tn | |
Working length: | 3000 mm | |
Throat depth: | 300 mm | |
Engine power: | 7.5 cv | |
Equipped with: | ||
Backgauge: | manual | |
Multi-mouth die with 9 mouths: | square Ø 74 mm |
Do you need more information about this second-hand AJIAL hydraulic press brake?
Contact us and we will inform you without any commitment on this AJIAL hydraulic press brake. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
AJIAL 2414 press brake
Technical characteristics of the second-hand AJIAL 2414 hydraulic press brake
Reference: | 130/B035 | |
Pressing force: | 240 Tn | |
Working length: | 6050 mm | |
Distance between frames: | 5100 mm | |
Recoil force: | 38 Tn | |
Adjustable stroke: | 7-250 mm | |
Backgauge travel: | 1000 mm | |
Throat depth: | 800 mm | |
Table width: | 240 mm | |
Distance table-ram: | 50 mm | |
Approach speed: | 50 mm/sec | |
Working speed: | 7.5 mm/sec | |
Return speed: | 47 mm/sec | |
Engine power: | 25 cv | |
Oil tank capacity: | 400 l | |
Approx machine weight: | 29500 Kgs | |
Machine site: | 6200x1690x2950 mm | |
Equipped with: | ||
Numerical Control: | CYBELEC CYBTOUCH 8 (2 axes - X,Y) | |
Compensation table: | manual | |
Pressure control: | from CYBELEC control | |
3 arms: | in the backgauge | |
Mouth die: | 112x112 mm | |
CE standards: | yes |
Do you need more information about this second-hand AJIAL 2414 hydraulic press brake?
Contact us and we will inform you without any commitment on this AJIAL hydraulic press brake. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
AJIAL CS-650 shearing machine
Features of the second-hand AJIAL CS-650 hydraulic shearing machine
Reference: | 031/B034 | |
Cutting length: | 6100 mm | |
Cutting thickness: | 6 mm | |
Throat depth: | 350 mm | |
Distance between frames: | 6250 mm | |
Gauge length: | 1000 mm | |
Cutting angle: | 1st 24' fixed | |
Cuts per minute: | 12 | |
Hydraulic pump flow: | 68 l/mm | |
Pump motor pressure: | 120 bar | |
Engine power: | 20 cv | |
Number of blades: | 8 | |
Blade section: | 57x20 mm | |
Number of rammers: | 25 | |
Ø rammers: | 70 mm | |
Total rammers force: | 40 Tn | |
Oil tank capacity: | 250 l | |
Approx machine weight: | 15.000 Kgs | |
Machine site: | 6680x2500x2030 mm | |
Equipped with: | ||
Ball table: | Yes | |
Blade set: | lower and upper | |
Blade adjustment: | pneumatic | |
Measurement indicator panel: | of the motorized backgauge | |
Cutting line lighting | ||
Console: | 1200 mm | |
Blade gap adjustment device: | Yes | |
Cutting length regulation device: | Yes | |
Stroke counter with resetting to 0: | ||
1 set of wrenches and accessories for maintenance | ||
CE standards: | yes |
Do you need more information about this second-hand AJIAL CS-650 hydraulic shearing machine?
Contact us and we will inform you without any commitment on this AJIAL hydraulic shear. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, cnc lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
SABI PBR 450/700 band saw
Technical characteristics of the second-hand SABI PBR 450/700 semi-automatic band saw
Reference: | 170-B032 | |
Round cutting 0º: | 450 mm | |
Rectangular cutting 0º: | 700x430 mm | |
Rectangular cut at 45º (right and left): | 450x430 mm | |
Band dimensions: | 6775x41x1.30 mm | |
Cutting speed: | 15-105 m/min | |
Main motor: | 5.5 Kw | |
Motor turning machine: | 0.33 Kw | |
Motor pump: | 0.10 Kw | |
Total power: | 9.10 kW | |
Vices' height: | 250 mm | |
Working height: | 880 mm | |
Weight: | 4000 kgs | |
Machine dimensions: | 3550x1720x2240 mm | |
Equipped with: | ||
Potentiometer for band speed regulation | ||
Head sliding on prismatic columns and linear guides | ||
Double clamping hydraulic vices | ||
Self-centering device | ||
Hydraulic cutting system with constant feed for hard materials |
Do you need more information about this second-hand SABI PBR 450/700 semi-automatic band saw?
Contact us and we will inform you without any commitment on this used bandsaw. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
SORALUCE TR-35 HSC milling machine
Technical characteristics of the second-hand SORALUCE TR35 HSC bed type milling machine
Reference: | 073-B031 | |
Table: | 3860 x 1200 mm | |
Maximum weight on table: | 10.500 Kgs | |
X-axis traverse: | 3500 mm | |
Y-axis traverse: | 1400 mm | |
Z-axis traverse: | 1200 mm | |
Milling head model: | Automatic 1º x 2.5º | |
Spindle taper: | ISO 50 | |
Spindle speed: | 5000 r.p.m. | |
Power: | 30 kw | |
Feedrate: | 20.000 mm/min | |
Rapid traverses: | 35.000 mm/min | |
Year: | 2005 | |
Equipped with: | ||
Control: | HEIDENHAIN iTNC 530 | |
Electronic handwheel: | HEIDENHAIN HR-410 | |
Tool Changer: | 40 tools | |
Internal coolant supply: | 20 bar | |
Electrical cabinet: | refrigerated | |
Probe: | RENISHAW RPM 60 | |
Chip conveyor: | 2 | |
Paper filter: | Yes | |
Full enclosure: | Yes |
Do you need more information about this second-hand SORALUCE TR35 HSC fixed bed milling machine?
Contact us and we will inform you without any commitment on this bed type milling machine . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GEMINIS GT5 G2 1200×2000 lathe
Technical characteristics of the second-hand GEMINIS GT5 G2 1200×2000 cnc lathe
Reference: | 218-B029 | |
Distance between centers: | 2000 mm | |
Height centers: | 615 mm | |
Max swing over bed: | 1200 mm | |
Max swing over slide: | 850 mm | |
Main spindle hole diam: | 230 mm | |
Main spindle nose: | DIN 55026-11 | |
Speed range: | 4, 0-700 rpm | |
Quill diameter: | 230 mm | |
Quill travel: | 300 mm | |
Year: | 2015 | |
Equipped with: | ||
Control: | FAGOR 8055 | |
Electronic handwheel: | FAGOR | |
3 jaw universal chuck: | Ø 700 mm | |
3 jaw universal chuck: | Ø 700 mm | |
Boring support: | Ø 120 mm | |
SAUTER turret 4 stations: | square Ø 290 mm | |
Chip conveyor: | Yes | |
Tailstock and quill: | motorized | |
Full enclosure: | Yes |
Do you need more information about this second-hand GEMINIS GT5 G2 1200×2000 cnc lathe?
Contact us and we will inform you without any commitment on this GEMINIS cnc lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GEMINIS GHT5 G2 1000×3000 lathe
Technical characteristics of the second-hand GEMINIS GHT5 G2 1000×3000 cnc lathe
Reference: | 218-B030 | |
Distance between centers: | 3000 mm | |
Height centers: | 500 mm | |
Max swing over bed: | 1000 mm | |
Max swing over slide: | 680 mm | |
Main spindle hole diam: | 230 mm | |
Main spindle nose: | DIN 55026-11 | |
Speed range: | 4 | |
Speed range I: | 0-175 rpm | |
Speed range II: | 0-350 rpm | |
Speed range III: | 0-700 rpm | |
Speed range IV: | 0-1400 rpm | |
Quill diameter: | 140 mm | |
Quill travel: | 300 mm | |
Year: | 2008 | |
Equipped with: | ||
Control: | FAGOR 8055 TC/C | |
3 jaw universal chuck: | Ø 630 mm | |
3 jaw universal chuck: | Ø 700 mm | |
SAUTER turret 4 stations: | square Ø 290 mm | |
Chip conveyor: | Yes | |
3 point steady rest: | Ø 400 mm |
Do you need more information about this second-hand GEMINIS GHT5 G2 1000×3000 cnc lathe?
Contact us and we will inform you without any commitment on this GEMINIS cnc lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
TOS 5-horizontal 5-axis boring machine
Technical characteristics of the second hand TOS horizontal 5-axis boring machine
Reference: | 110-A025 | |
Table dimensions: | 1800x2200 mm | |
Max weight on table: | 12.000 kgs | |
X-axis travel: | 4000 mm | |
Y-axis travel: | 3000 mm | |
Z-axis travel: | 1250 mm | |
Quill travel (W-axis): | 800 mm | |
Table rotation (B-axis): | Continuous - (0.001º) | |
Quill diameter: | 130 mm | |
Speed range: | 0-2500 rpm | |
Engine power: | 37 kw | |
Year: | 2007 | |
Equipped with: | ||
Control: | Heidenhain iTNC 530 | |
Electronic handwheel: | Heidenhain HR-410 | |
Chip conveyor: | Yes | |
Internal coolant supply: | with paper filter | |
Coolant supply: | in the electrical cabinet | |
Lifting platform: | Yes |
Need more information about this second hand TOS WHN (Q) 13 CNC boring machine?
Contact us and we will inform you without any commitment on this TOS horizontal boring machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
SORALUCE SORA 4 milling machine
Technical characteristics of the second-hand SORALUCE SORA 4 bed type milling machine
Reference: | 073-N301 | |
Table: | 4000x1000 mm | |
Maximum weight on table: | 10.500 Kgs | |
Longitudinal traverse (X-axis): | 4000 mm | |
Cross traverse (Y-axis): | 1000 mm | |
Vertical traverse (Z-axis): | 1600 mm | |
Milling head model: | Automatic A/B axes - A 2.5º-B 2.5º | |
Spindle taper: | ISO 50 | |
Speed range: | 15-1600 rpm | |
Power: | 18 kW | |
Approx machine weight: | 22.000 kgs | |
Machine dimensions: | 98004050x3600 mm | |
Equipped with: | ||
Control: | SIEMENS SINUMERIK 810 | |
Tool magazine: | 60 units | |
Chip conveyor: | Yes |
Do you need more information about this second-hand SORALUCE SORA 4 bed type milling machine?
Contact us and we will inform you without any commitment on this bed type milling machine . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
PINACHO L1-225 Lathe
Technical characteristics of the second-hand PINACHO L-1/225 universal lathe
Reference: | 211-B027 | |
Distance between centers: | 1650 mm | |
Centers' height: | 225 mm | |
Max swing over bed: | 440 mm | |
Swing over cross slide: | 260 mm | |
Swing over gap: | 640 mm | |
Spindle hole diameter: | 52 mm | |
Gap length: | 160 mm | |
Spindle speeds: | 12, 32-1800 rpm | |
Engine power: | 5.5 CV | |
Approx machine weight: | 1550 kgs | |
Machine dimensions: | 2705x850x1370 mm | |
Equipped with: | ||
3-jaw universal chuck: | Ø 250 mm | |
Set of jaws: | 1 |
Do you need more information about this used PINACHO L-1/225 universal lathe?
Contact us and we will inform you without any commitment on this PINACHO lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, CNC lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225