HARTFORD machining center - 075/R010
Technical characteristics of the used HARTFORD MERCURY VMC-1600 vertical machining center
Table 1700×750 mm.
Max. allowed weight on the table 2,000 kgs
Travels:
- X : 1.600 mm
- Y : 800 mm
- Z: 620 mm
Spindle taper ISO 50
Spindle speed 8,000 rpm
Tool changer RANDOM 32 units
Motor power 15 KW
Machine dimensions 4350x4450x3155 mm.
Weight 12.300 kgs
Year 2005
Equipped with:
- CNC FANUC 18i
- Inner coolant supply
- Chip conveyor
- Equipped with several cones.
OKK machining centre - 075/R043
Technical features of the second-hand OKK MCV860 vertical machining center
Table 2000 x 800 mm
Travels:
- X : 2040 mm
- Y : 860 mm
- Z: 720 mm
Spindle taper ISO 50
Spindle speed 25-8000 r.p.m.
Tool changer 30 units
Allowed weight on the table 1800 kg.
Year 2002
Equipped with:
- CNC FANUC 18-M
- Inner coolant supply
- Chip conveyor
DAHLIH MCV 1450 machining center
Information about the used DAHLIH MCV 1450 vertical machining center
The vertical machining center DAHLIH MCV 1450 It is considered one of the best as regards machine manufactured in Taiwan. Features large travels on the Y axis and the Z axis with a table of 1600 mm and ISO 50 cone with a spindle motor 30 HP, making this machining center a heavy machine. Moreover, this vertical machining center has a spindle ISO 50 that can reach 6,000 rpm. Notably machine DAHLIH is equipped with internal cooling, chip conveyor and chain magazine 32 tools.
Technical features of the used DAHLIH MCV 1450 vertical machining center
Reference: | 075-R044 | |
Table: | 1600 x 880 mm | |
Max weight on table: | 2000 Kgs | |
X-axis traverse: | 1450 mm | |
Y-axis traverse: | 750 mm | |
Z-axis traverse: | 750 mm | |
Spindle taper: | ISO-50 | |
Spindle speed: | 6.000 r.p.m. | |
Spindle motor: | 30 HP | |
Year of retrofitting: | 2020 | |
Equipped with: | ||
Control: | FANUC 18-M | |
Tool Changer: | 32 tools chain | |
Coolant supply: | internal | |
Chip conveyor: | Yes | |
Cutting oil tank: | with paper filter |
Need more information about this second-hand DAHLIH MCV 1450 machining center?
Such a used machine is located at our facilities and it is ready for immediate delivery as it has been revised and completely retrofitted. Both, mechanically and electronically. You can also check in our facilities that the machine has a geometry 0.02 maximum error in each of its axes. Also we encourage you to watch the video of the machine.
Contact us and we will inform you without any commitment on this DAHLIH MCV 1450 machining center. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, cnc lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
DMG machining centre - 075/N087
Technical features of the second-hand DMG DMU 50 eVo Linear 5-axis vertical machining center
Table 500 x 380 mm
Max allowed weight on the table 200 kg.
Travels:
- X : 500 mm
- Y : 450 mm
- Z: 400 mm
- C axis: 360
Spindle taper HSK 63
Spindle speed 18,000 r.p.m.
Tools changer 60 units
Spindle power 35 KW
Machine dimensions 3140 x 2190 x 2520 mm.
Weight 7000 kgs.
New head in 2015 (2000 working hours)
Year 2008.
Equipped with:
- CNC HEIDENHAIN TNC 530
- Inner coolant supply 40 bar
- Chip conveyor
- Piece touch probe system HEIDENHAIN
- Additional tank of 600 liters with paper filter.
Bridge type milling machines
Find below our selection of second-hand bridge type milling machines which includes brands as relevant as Zayer milling machines or Correa milling machines. We fully trust these firms based on our knowledge of this type of used machinery for the good results and excellent benefits offered to our customers.
Backed by 40 years of experience and expertise in the market of milling machines and also by an experienced team of mechanical-electronic technicians who are able to transform used milling machines into machinery with excellent conditions for immediate use.
Contact us and our team will personally advise you on the most suitable model of bridge type milling machine in order to achieve the best performance.
Shears
The KLISMAN shear is a machine made of welded steel with excellent rigidity and stability. The main parts consist of left and right pillars, clamping board, a working talbe and oil tank.
Upper knife beam: a triangle steel-sheet welded structure with guiding rail plate, blade and back-gauge device.
The blade adjustment is very easy to use, it is carried out through a front wheel indicating the thickness of the sheet to be cut.
The table is equipped with balls to facilate the handling of the sheet.
The machine is fitted with a nitrogen accumulator, which it uses for the return of the blade and damping in the cut.
Machine description
- Vertical cutting and variable angle shear
- 4 side blades (up and down)
- ES21 numerical control - 2 axes (motorised back-gauge and blade tilt)
- Front wheel for blade clearance
- Front folding grid
- 3 front arms
- Steel ball table
- Pedal
- TELEMECANIQUE electrical components
- Rear safety lights (CE regulation)
- Cut off light
- Stroke counter
Hydraulic Press brakes
The main components of the press brake of KLINSMAN are fabricated in welded steel plates, featuring high strength, good rigidity and it is lightweight.
The frame consists of left and right vertical side braces, working table, oil tank, etc., which are welded together. The working table is located at the lower part of the left and right vertical side braces. And the oil tank is at the top of the machine.
Ram synchronization during the stroke is controlled by a mechanical forced synchrony system, which is simple in structure, reliable in operation and easy in maintenance. This system consists of two telescopic arms which seek to compensate the parallelism between the ram and the press brake table.
The motor, pump and valves are all in the oil tank. To ensure the cylinder is always full of oil when the ram moves down fast, and feeding valve is used to speed up the ram travel so as to save energy.
Machine description
- E21 numerical control - 2 axes
- Pedal
- Front bars for better support of the piece and millimeter bars with front stop
- Side and rear protections of polycarbonate and sheet metal
- TELEMECANIQUE and SCHNEIDER electrical components
- The punch and multimouth die are mde of first class steel
Klinsman
Klinsman is one of the largest manufacturers worldwide of shears and hydraulic brakes.
Their machines are characterized by their high rigidity and reliability at work. From conventional machines to CNC machines.
CECAMASA leads since 2000 with distribution in Spain, Portugal and part of South America with the guarantee of the sale of a product of great features and performance guarantee.
The machining of the machines is carried out on the structure of the machine already welded in order to avoid deformations. Top-quality brands such as Telemecanique or Schmersal are integrated into the electrical part and both assembly and painting follow an order and care established for its proper functioning during the useful life of the machine.
SERTOM CASANOVAS plate bending machine
Information about the used SERTOM-CASANOVAS 4 roll bending machine
The second-hand SERTOM CASANOVAS 4 roll bending machine is mainly characterized by three aspects:
Firstly, it's a bending machine of 4 rolls that carries out the pre-bending for both sides, that is, a double pre-bending, being able to make a hoop without any plane. Secondly, it has two side supports to help the metal sheet, taking into account that is a heavy bending machine with a bending capacity up to 50 mm it makes it easy the works to be done by the plate rolls. And, finally, this SIAM hydraulic L-rafter allows to hold the bent piece with full safety.
The brand SERTOM is one of the main bending machine manufacturers in the world and is synonymous with quality. The SERTOM-CASANOVAS bending machine is focused and perfect for heavy boilermaker or for any manufacturers of metallic structures and deformation metal sheet workshop.
Technical features of the second-hand SERTOM - CASANOVAS hydraulic bending machine of 4 rolls
Reference: | 020-R030 | |
Max bending: | 3050 mm | |
Pre-bending capacity: | 32 mm | |
Bending capacity: | 50 mm | |
Roller stations Ø: | 500 mm | |
Side rollers Ø: | 400 rpm | |
Power: | 37 Kw - 400 V - 50 Hz | |
Approx machine weight: | 52000 kgs | |
Machine dimensions: | 4550x2100x1800 mm | |
Equipped with: | ||
CN for bending | ||
SIAM hydraulic L-rafter | ||
Ferrule side support |
Need more information about this used hydraulic 4 roll plate bending machine?
Contact us and we will inform you without any commitment on this SERTOM CASANOVAS 4 roll bending machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Bed type milling machines
Find below our range of second-hand bed type milling machines including such prominent brands as ZAYER, SORALUCE or CORREA among many others as MTE, LAGUN, CME and ANAYAK. All of them premium brands present in our machinery and which offer high performance and meet the requirements of both, domestic and international, customers.
The milling machines are emerging as one of our flagship products. Our extensive experience in the market supports us and allows us to best advise on the acquisition of used machinery of high quality. Our used milling machines have been thoroughly checked by our team of experts to reach the customer in optimal conditions, as if they were brand new.
Contact us and our staff will be more than happy to advise you on the bed type milling machine that best fits your real needs.