+ 34 935 730 225 
SORALUCE FX 14000
Technical characteristics of the used SORALUCE FX 14000 mobile column milling machine
Reference: 073-C018 X-axis traverse: 14.000 mm Y-axis traverse: 1.600 mm Z-axis traverse: 4.800 mm Pick-up of heads: Prepared for 4 heads Boring head: direct outlet, reinforced
long. 400 mm. dia. 195 mm. 3000 rpm. Engine power 46 kwOrthogonal head indexable 1º-1º
cone DIN-69871-AD
4000 rpm. Engine power 46 kwFeedrate: 10.000 mm/min Rapid traverses: 25.000 mm/min Year: 2009 Total power: 133 kva Floor ocupation: 19880x12400x7350 mm. Total weight 62 Tn. Equipped with: Control: HEIDENHAIN iTNC 530 Electronic handwheel: HEIDENHAIN HR 420 Tool magazine: 120 pcs type M, horizontal, hmta weight. 30 kgs. HEIDENHAIN TT-140 Stylus Yes, for tool measurement Coolant supply: internal, 30 bar variator. with paper filter tank 1 Motorized Drotting Table ± 5º DEMMELER DRALT2500 2500x2500 . recorrido 2000 mm. Peso max. 60 tn. 1 Mesa RootaSlante: DEMMELER DRLTS2500,
3000x2500 . recorrido 2000 mm. Peso max. 60 tn.1 base plate: 3500x2500x300 mm. carga max. 15 Tn/m2 Chip conveyor: Yes Splash guard: complete against projections on the front and both sides Platform for the operator: Yes, max height. 3600mm. 
Do you need more information about this second-hand SORALUCE FX-14000 mobile column milling machine?
Contact us and we will inform you without any commitment on this SORALUCE FX-14000 mobile column milling machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GEMINIS GT5 G2-1100×4000 Lathe
Technical characteristics of the second-hand GEMINIS GT5 G2-1100×4000 cnc lathe
| Reference: | 218-C017 | |
| Distance between centers: | 4000 mm | |
| Max swing over bed: | 1100 mm | |
| Max swing over slide: | 750 mm | |
| Main spindle hole diam: | 130 mm | |
| Longitudinal car width: | 900 mm | |
| Cross carriage width: | 400 mm | |
| Cross travel: | 600 mm | |
| Main spindle nose: | DIN 55026-11 | |
| Speed range: | 4, 0-1400 rpm | |
| Working feed rate: | 8000 m/min | |
| Main motor: | 30 kw | |
| Quill diameter: | 160 mm | |
| Quill travel: | 300 mm | |
| Year: | 2011 | |
| Piece weight between points: | 6000 kgs | |
| Weight of piece in the air: | 1200 kgs | |
| Weight approx. machine: | 13000 kgs | |
| Equipped with: | ||
| Control: | FAGOR 8055 TC/C | |
| Electronic handwheel: | FAGOR | |
| Plato ROHM 3 universal claws: | Ø 630mm | |
| SAUTER turret: | 8 stations | |
| Chip conveyor: | Yes | |
| Tailstock and quill: | motorized | |
| 2 steady rests | own manufacturing |
Do you need more information about this second-hand GEMINIS GT5 G2-1100×4000 cnc lathe?
Contact us and we will inform you without any commitment on this GEMINIS cnc lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
press ARISA
Information of ARISA SE2F-630-300-160-S Double Post Eccentric Press with SIEMENS 510P PLC Used
The ARISA eccentric press of 630 tn secondhand Available for sale in our warehouses is a double-post press that can deliver 15 to 60 strokes per minute. It is a second-hand eccentric press fully equipped with a feeder, winder and straightener.
Technical characteristics of the used ARISA SE2F-630-300-160-S double-post eccentric press
| Reference: | 141-N321 | |
| Max force: | 630 Tn | |
| Daylight: | 3250 mm | |
| Table plate dimensions: | 3000x1600 mm | |
| Car surface: | 3200x1600 mm | |
| Closing height above the table top: | 675 mm | |
| Stroke: | 350 mm | |
| Slide adjustment: | 400 mm | |
| Height from the table to the floor: | 1150 mm | |
| Strokes per minute: | 15-60 | |
| Coasting time: | 0,26 s. | |
| Main motor power: | 98,5 Kw | |
| Total height above ground: | 6795 mm. | |
| Approx machine weight: | 150.000 Kgs | |
| Equipped with: | ||
| Feeder ARISA ACNS-1250-5 : | Regulation in CN in height | |
| Loader cart LASA CHF50-8T: | Max coil weight 10000 kg, max-min coil Ø 1600-600 mm | |
| Winder LASA 50 CH-8MH/BPHM/DLX: | Max coil weight 10,000 kg, max. Ø. coil 1600 mm. max width sheet 1250 mm. hydraulic operation. | |
| Planner LASA HDF-50-CFA/ABH | With 13 rollers, sheet dimensions 1250x6 mm. |
Do you need more information about this second-hand ARISA SE2F-630-300-160-S eccentric press?
Contact us and we will inform you without any commitment on this double upright eccentric press ARISA SE2F-630-300-160-S. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
CORREA NORMA 45 milling machine
Technical characteristics of the second-hand CORREA NORMA 45 bed type milling machine
| Reference: | 073-C014 | |
| Table: | 4800 x 1000 mm | |
| Maximum weight on table: | 10.000 Kgs | |
| X-axis traverse: | 4500 mm | |
| Y-axis traverse: | 1250 mm | |
| Z-axis traverse: | 1500 mm | |
| Milling head model: | Automatic UDG 2.5º x 2.5º | |
| Spindle taper: | BT-50 | |
| Spindle speed: | 4000 r.p.m. | |
| Power: | 24 kw | |
| Rapid traverses: | 20 m/min | |
| Year: | 2013 | |
| Equipped with: | ||
| Control: | HEIDENHAIN iTNC 530 | |
| Electronic handwheel: | HEIDENHAIN HR | |
| HYPATIA tool Charger: | 30 tools | |
| ZEATZ fourth axis with tailstock: | Divisor plate diameter 1000 mm. | |
| Chip conveyor: | Yes | |
| Full enclosure: | Yes | |
| Internal coolant supply: | High pressure pump |
Specifications of the fixed bench strawberry Standard 45 occasion
This Second -hand Standard 45 Standard Fixed Bank milling is made in 2013 and equipped with Heidenhain ITC 530. With a 4800 x 1000 mm table and a maximum weight capacity of 10,000 kgs, it offers 4500 mm tours on the X axis, 1250 mm on the Y Y Y 1500 mm axis on the Z axis. In addition, it has a UDG 2.5º x 2.5º automatic head model. It is in optimal operating conditions and available for immediate delivery in our used industrial machinery stock.
Do you need more information about this second-hand CORREA NORMA 45 bed type milling machine?
Contact us and we will inform you without any commitment on this bed type milling machine . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
CORREA FP-60 milling machine
Technical characteristics of the second-hand CORREA FP-60 gantry milling machine
| Reference: | 073-TM73 | |
| Table: | 5500x1600 mm | |
| Maximum weight on table: | 25000 Kgs | |
| X-axis traverse: | 5000 mm | |
| Y-axis traverse: | 3300 mm | |
| Z-axis traverse: | 1200 mm | |
| Distance between columns: | 2700 mm | |
| Heads: | HURON manual Direct output (5000 rpm) | |
| Spindle taper: | ISO 50 | |
| Speed range: | 125-2000 rpm | |
| Spindle power: | 42 kw | |
| Feedrate: | 2-6000 mm/min | |
| Rapid feedrates /quill: | 7200 / 5000 mm/min | |
| Approx machine weight: | 60.000 kgs | |
| Machine dimensions: | 12700x5420x4700 mm | |
| Year: | 1993 (Retrofit 2015) | |
| Equipped with: | ||
| Control: | FAGOR 8065 double control | |
| Electronic doble handwheel: | FAGOR | |
| Electrospindle head: | FAEMAT (24000 rpm) |
Do you need more information about this second-hand CORREA FP-60 gantry milling machine?
Contact us and we will inform you without any commitment on this CORREA milling machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
CORREA FOX-40 milling machine
Technical characteristics of the second-hand CORREA FOX-40 gantry milling machine
| Reference: | 073-TM82 | |
| Table dimensions: | 4500x2000 mm | |
| Number of T-slots: | 15 | |
| T-slots measures: | 22 mm | |
| Max weight on table: | 15000 kgs | |
| X-axis traverse: | 4500 mm | |
| Y-axis traverse: | 3000 mm | |
| Z-axis traverse: | 1500 mm | |
| Distance between columns: | 2500 mm | |
| Milling head model: | Automatic UAD 0.02º | |
| Spindle taper: | ISO-50 | |
| Clamping system: | Hydraulic | |
| Speed range: | 6000 rpm | |
| Spindle power: | 37 kw | |
| Maximum torque: | 1298 Nm | |
| Feedrate: | 0-1000 mm/s2 | |
| Rapid traverses: | 0-25000 mm/min | |
| Machine weight: | 58.500 kgs | |
| Machine dimensions: | 13250x6200x6500 mm | |
| Year: | 2019 | |
| Equipped with: | ||
| Doble control: | HEIDENHAIN TNC 640 | |
| Double wireless electronic steering wheel: | HRA-551 | |
| Chip conveyors: | 2 | |
| HYPATIA static changer: | 10 tools | |
| GRUNDFOS internal and external cooling | ||
| Tool measurement probe: | Renishaw RMP60 | |
| Measuring probe: | Renishaw RTS | |
| Splash guard: | Yes | |
| Advanced PLC: | CORREA |
Do you need more information about this second-hand CORREA FOX-40 gantry milling machine?
Contact us and we will inform you without any commitment on this CORREA milling machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
FAT 270 band saw
Technical characteristics of the second-hand FAT 270 manual band saw
Cutting data
| 90º | 45º | 60º | |
| Round | 215 mm | 155 mm | 90 mm |
| Square | 215 mm | 145 mm | 90 mm |
| Rectangular | 250×150 mm | 145×165 mm | 90×90 mm |
| Reference: | 170-C007 | |
| Band dimensions: | 2450x25x0.9 mm | |
| Work table height: | 1000 mm | |
| Band speed: | 35-70 m/min | |
| Band motor: | 0.55-1.1 KW | |
| Weight: | 300 kgs | |
| Machine dimensions: | 1200x800x1530 mm | |
| Equipped with: | ||
| Roller track: | Yes |
Do you need more information about this second-hand FAT 270 manual band saw?
Contact us and we will inform you without any commitment on this used band saw. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com1
+34 935 730 225
FEXAC UM milling machine
Technical characteristics of the used FEXAC UM universal milling machine
| Reference: | 072-C011 | |
| Table: | 1300x300 mm | |
| Longitudinal traverse (X-axis): | 950 mm | |
| Cross traverse (Y-axis): | 275 mm | |
| Vertical traverse (Z-axis): | 500 mm | |
| Number of feedrates: | 12 | |
| Longitudinal and cross (min and max): | 11-500 mm/min | |
| Vertical (min and max): | 4,2-200 mm/min | |
| Longitudinal and transverse rapid traverse: | 2500 mm/min | |
| Vertical rapid traverse: | 1000 mm/min | |
| Power: | 4 CV | |
| Spindle taper: | Spindle cone ISO 40 | |
| Speed range: | 12, 30-1200 rpm | |
| Approx machine weight: | 2370 kgs | |
| Machine dimensions: | 1950x1380x1670 mm | |
| Equipped with: | ||
| Digitals: | FAGOR | |
| Head: | HURON |
Do you need more information about this second-hand FEXAC UM universal milling machine?
Contact us and we will inform you without any commitment on this universal milling machine. If you wish, you can also visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, conventional lathes, cnc lathes, bending machines, shears, folding machines, grinding machines, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
ERLO TSAR-32 Drill
Features of the used ERLO TSAR-32 column drill
| Reference: | 191-C010 | |
| Table: | 400x420 mm | |
| Column diameter: | 125 mm | |
| Max drilling capacity in steel 70 kg: | 32 mm | |
| Max steel threading capacity 70 kg: | M28 | |
| Spindle taper: | CM.4 | |
| Spindle travel: | 160 mm | |
| Spindle-column distance: | 300 mm | |
| Spindle-table distance: | Min 70 - Max 885 mm |
Do you need more information about this second-hand ERLO TSAR-32 column drill?
Contact us and we will inform you without any commitment on this column drill. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
ERLO TCA-50 drill
Features of the used ERLO TCA-50 column drill
| Reference: | 191-C009 | |
| Table: | 550x550 mm | |
| Max weight on table: | 275 kgs | |
| Max drilling capacity in steel 70 kg: | 50 mm | |
| Max drilling capacity in cast iron 200 Br: | 55 mm | |
| Max steel threading capacity 70 kg: | M.40 | |
| Max tapping capacity in cast iron 200 Br: | M.50 | |
| Max drilling depth: | 260 mm | |
| Speeds: | 9, from 45 up to 1115 | |
| Drilling feeds: | 0,08-0,16-0,24-0,35 | |
| Main motor: | 4 HP | |
| Approx machine weight: | 850 kgs | |
| Machine dimensions: | 1330x800x2750 mm | |
| Equipped with: | ||
| Cutting oil pump: | Yes |
Do you need more information about this second-hand ERLO TCA-50 column drill?
Contact us and we will inform you without any commitment on this column drill. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
