+ 34 935 730 225 
Sierra love DANOBAT CR-330 A
Technical characteristics of the second-hand DANOBAT CR-330 A automatic band saw
| Reference: | 170-E012 | |
| Round cutting: | 335 mm. | |
| Rectangular cutting: | 340x335 mm | |
| Maximum capacity with vertical jaw | 330x210 mm. | |
| Table height | 800 mm. | |
| Diameter of steering wheels | 500 mm. | |
| Tape speeds | 14 / 90 mph. | |
| Belt dimensions | 4970x34x1,1 mm. | |
| Coolant tank capacity | 49 L | |
| Potencia motor principal | 3 Kw | |
| Hydraulic group engine power | 0,75 kw | |
| Coolant pump power: | 0,24 kw | |
| Hydraulic tank capacity | 40 L | |
| Cleaning brush motor power | 0,12 kw | |
| Weight: | 1800 kgs | |
| Machine dimensions: | 2510x1700x1850 mm. | |
| Equipped with: | ||
| CE standards |
Do you need more information about this second-hand DANOBAT CR-330 A automatic band saw?
Contact us and we will inform you without any commitment on this used bandsaw. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
ventas@cecamasa.com
+34 935 730 225
Twin lathe GHT5 1000+50×3000
Technical characteristics of the second-hand GEMINIS GHT5 1000+50×3000 CNC lathe
| Reference: | 218-D057 | |
| Distance between centers: | 3000 mm | |
| Height centers: | 525 mm | |
| Max swing over bed: | 1050 mm | |
| Max swing over slide: | 750mm | |
| Main spindle nose: | ASA D1 11 | |
| Ø main spindle | 104 mm | |
| Speed range: | 4, 0-1400 rpm | |
| Quill diameter: | 140 mm | |
| Quill travel: | 300 mm | |
| Year: | 2001 (retrofit 2026) | |
| Equipped with: | ||
| Control: | FAGOR 8055 TC/C | |
| Plato 3 universal claws MK: | Ø 630 mm | |
| Turret 4 stations: | ||
| Chip conveyor: | Yes | |
| Fixed rear window 3 positions max Ø 330 mm and mobile rear window | ||
| Accuracy levels |
Retrofitting work that has been carried out
- Gluing new biplast on carriage, slide and conical.
- Grinding of bench, carriage and slide.
- Adjustment of headstock, carriage, slide, tailstock and rulers, leaving everything in geometry according to standards.
- Verification of the entire lubrication system.
- Repair of X and Y axis spindles.
- Review and replacement of bearings.
- All guide-cleaning sweepers have been replaced.
- Verification of the proper functioning of the machine.
- Painted machine.
Do you need more information about this second-hand GEMINIS GHT5 1000+50×3000 CNC lathe?
Contact us and we will inform you without any commitment on this twin CNC lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Taladro BARMIA AX-3
Technical characteristics of the second-hand Ibarmia Ax-32 column drill
| Reference: | 191-D055 | |
| Table: | 480 x 400 mm | |
| Drill bit: | 32 mm | |
| Distance from the spine center center | 300 mm. | |
| Spindle travel | 150 mm. | |
| Number of speeds: | 9, from 104 to 1450 | |
| Advance: | automatic | |
| Main motor: | 1,2 Kw | |
| Approx machine weight: | 385 Kgs. | |
| Column diameter | 125 mm. | |
| Equipped with: | ||
| Rotating table | ||
| CE standards |
Do you need more information about this second-hand Ibarmia Ax-32 column drill?
Contact us and we will inform you without any commitment on this second hand drill IBARMIA . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Fresadora Zayer 30 KCU 8000 AR
TECHNICAL CHARACTERISTICS OF THE MOBILE COLUMN SHEET ZAYER 30 KCU 8000 AR USED
Reference: 073-n330 X-axis traverse: 8000 mm Y-axis traverse: 1600 mm Z-axis traverse: 3500 mm Pick-up of heads: - A/B 0.001º-0.001º. 45º head. 3+2
- Direct departure headSpindle taper: SK 50 Power: 40 kW Work progress 10.000 mm/min Rapid feeds 20.000 mm/min Year: 2014 Equipped with: Control: HEIDENHAIN iTNC 530 Electronic handwheel: HR-520 Tool magazine: 30 uds Internal coolant supply: Yes Demmeler Mesa is: 2000x2000x1000 mm
40 Tn.Succession table Stolle squads Yes Paper filter: Yes Piece measurement probe: RENISHAW RMP 600 Laser measurement system Blum Micro A5 Chip conveyor: Yes Lenze Light Barriers Yes
Do you need more information about this Zayer 30 Kcu 8000 -ar mobile column mill?
Contact us and we will inform you without any commitment on this zayer mobile column 30 kcu 8000 AR. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Zayer GMCU 6000 AR milling machine
TECHNICAL CHARACTERISTICS OF THE ZAYER GMCU 6000 AR Milling
Reference: 073-n329 X-axis traverse: 6000 mm Y-axis traverse: 4050 mm Z-axis traverse: 1250mm Distancia entre columnas 3300 mm Pick-up of heads: - A/B 0.001º-0.001º. 45º head. 3+2
- Direct departure headSpeed range: 60-4500 rpm Spindle taper: SK50 DIN 69871 Max force 60 kW Year: 2014 Work progress 6-10.000 mm/m Rapid advances (x, y, z 25.000 mm/min Equipped with: Control: HEIDENHAIN iTNC 530 Tool magazine: 30 uds Table: 7000x2500x300 mm
8 slots t
Max. 15 tn x m²Electronic hand-wheel HR-520 Internal coolant supply: 15 bar Paper filter: 2000 L Chip conveyor: Yes Lenze Light Barriers Yes
Do you need more information about this gmcu 6000 a second -hand bridge mill?
Contact us and we will inform you without any commitment about this bridge milling Zayer GMCU 6000 AR. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
PINACHO S-90/260 lathe
Technical features of the second hand PINACHO S-90/260 universal lathe
| Reference: | 211-D051 | |
| Distance between centers: | 1625 mm | |
| Centers' height: | 260 mm | |
| Max swing over bed: | 530 mm | |
| Swing over cross slide: | 325 mm | |
| Swing over gap: | 780 mm | |
| Spindle hole diameter: | 68 mm | |
| Gap length: | 220 mm | |
| Spindle speeds: | 12, 30-1500 rpm | |
| Engine power: | 5.5 Kw | |
| Year: | ||
| Approx machine weight: | 1615 kgs | |
| Machine dimensions: | 2860x1000x1730 mm | |
| Equipped with: | ||
| Readouts: | Fagor A 2 Ejes | |
| 3-jaw universal chuck: | Ø 250 mm | |
| Turret: | Quick change | |
| Steady rest: | Ø 200 mm | |
| Tools: | according photo | |
| CE standards: | yes |
Do you need more information about this used PINACHO S-90/260 universal lathe?
Contact us and we will inform you without any commitment on this PINACHO lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, CNC lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Rectificadora Ger C-600 CNC
Technical characteristics of the universal rectifier Ger C-600 CNC used
| Reference: | 161-D048 | |
| Distance between centers: | 600 mm | |
| Centers' height: | 140 mm | |
| Max grinding diameter: | 275 mm | |
| Max weight between points | 80 Kg. | |
| Max weight admitted air | 60 Kg. | |
| X-axis speed: | 0,01/1500 mm/min | |
| Z-axis speed: | 0,01/1500 mm/min | |
| Grinding wheel dimensions: | Ø 400x50x127 mm | |
| Drive power, head engine | 5,5 kw | |
| PARTY PORT PARTY | 11 Nm. | |
| Potencia total | 11,3 kw | |
| Approx machine weight: | 2900 Kgs. | |
| Machine dimensions: | 3200x2200x2050 mm | |
| Year: | 2007 | |
| Equipped with: | ||
| Numerical Control: | FAGOR 8055 | |
| C axis controlled rotation of the piece | ||
| B axis rotation or rotation of the grinding head (angular orientation) | ||
| Tailstock | ||
| Head for internal grindings | potency 1.1 kW RPM 12000/18000 | |
| 7 Portamuelas | Ø: 120 mm, 160 mm, 170 mm, 170 mm, 175 mm,180 mm, 180 mm | |
| 5 Muelas | Ø 240 mm, 300 mm, 330 mm, 360 mm, 400 mm | |
| Wheel balancer: | BALACE SYSTEMS VM 24 | |
| Two three -claw rohm dishes | Ø 120 mm, Ø150 mm. |
Do you need more information about this universal rectifier GER C-600 CNC second-hand?
Contact us and we will inform you without any commitment on this rectificadora universal GER C-600 CNC . If you wish, you can visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, CNC lathes, machining centers, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
HOYTOM GH-500 slotting machine
Technical characteristics of the second-hand HOYTOM GH-500 slotting machine
| Reference: | 240-D053 | |
| Max slot length: | 500 mm | |
| Max slot width: | 50 mm | |
| Cutting speed: | 7.5 m/min | |
| Return speed: | 15 m/min | |
| Main motor power: | 3 CV | |
| engine speed | 1500 rpm | |
| Equipped with: | ||
| Very well equipped: | according photo |
Do you need more information about this second-hand HOYTOM GH-500 slotting machine?
Contact us and we will inform you without any commitment on this HOYTOM slotting machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
ELITE AR 5B sharpener
Technical characteristics of the used ELITE AR 5B sharpener
Do you need more information about this second-hand ELITE AR 5B sharpener?
Contact us and we will inform you without any commitment on this ELITE AR 5B sharpener. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
CNC Pinacho Taurus 260-105
Technical Characteristics Del CNC Pinacho Taurus 260 of the second bro
| Reference: | 218-D041 | |
| Year: | 2005 | |
| Distance between centers: | 1000 mm | |
| Max swing over bed: | 530 mm | |
| Max swing over slide: | 315 mm | |
| Main spindle bore diameter: | 105 mm | |
| Spindle nose | From 55027 | |
| MORSE SHUSE COE | 5 | |
| Speed range: | 2, 0-2000 rpm | |
| Max force | 11 KW | |
| Equipped with: | ||
| Control: | FAGOR 8055 | |
| Chuck: | 3-jaw chuck | |
| Torreta Duplomatic: | 8 stations | |
| Steady rest | ||
| Equipped with many claws |
Do you need more information about this CNC Pinacho Taurus 260 second -hand lathe?
Contact us and we will inform you without any commitment on this CNC Pinacho Taurus 260. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
