+ 34 935 730 225 
Taladro BARMIA AX-3
Technical characteristics of the second-hand Ibarmia Ax-32 column drill
| Reference: | 191-D055 | |
| Table: | 480 x 400 mm | |
| Drill bit: | 32 mm | |
| Distance from the spine center center | 300 mm. | |
| Spindle travel | 150 mm. | |
| Number of speeds: | 9, from 104 to 1450 | |
| Advance: | automatic | |
| Main motor: | 1,2 Kw | |
| Approx machine weight: | 385 Kgs. | |
| Column diameter | 125 mm. | |
| Equipped with: | ||
| Rotating table | ||
| CE standards |
Do you need more information about this second-hand Ibarmia Ax-32 column drill?
Contact us and we will inform you without any commitment on this second hand drill IBARMIA . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
ERLO TCA-50 drill
Technical characteristics of the second-hand ERLO TCA-50 column drill
| Reference: | 191-E017 | |
| Table: | 550 x 550 mm | |
| Base dimensions | 600 x 1060 mm | |
| Drill capacity: | 50 mm | |
| Tiltable rotating table: | Yes | |
| Transmission | Gears | |
| Spindle travel | 260 mm | |
| Spindle-column distance | 400 mm | |
| Spindle-table distance (min-max) | 70 - 802 mm | |
| Spindle-base distance | 1290 mm | |
| Column diameter | 200 mm | |
| Speeds: | 9, from 45 up to 1115 | |
| Drilling feeds: | 0,08 - 0,16 - 0,24 - 0,35 mm/rev | |
| Power: | 4 HP | |
| Main engine speed | 1500 rpm | |
| Approximate weight of the machine | 900 kg | |
| machine dimensions | 1200 x 600 x 2600 mm | |
| Equipped with: | ||
| Automatic advance | ||
| Cutting oil pump | ||
| CE standards |
Do you need more information about this second-hand ERLO TCA-50 column drill?
Contact us and we will inform you without any commitment on this used ERLO drill. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
ERLO SER-30 drill
Characteristics of the used ERLO SER-30 Drill
| Reference: | 194-E016 | |
| Table | 316 x 288 mm | |
| Diameter drill | 30 mm | |
| Tapping capacity | M-25 | |
| Transmission | Gears | |
| Spindle travel | 120 mm | |
| Spindle-column distance | 256 mm | |
| Spindle-table distance (min-max) | 155 - 580 mm | |
| Column diameter | 100 mm | |
| Speeds | 8 (from 65 to 3060 rpm) | |
| Max force | 1,1 / 1,6 CV | |
| Main engine speed | 1500 / 3000 rpm | |
| Approximate weight of the machine | 250 kg | |
| machine dimensions | 800 x 600 x 1450 mm (con banco 2250 mm) | |
| Equipped with: | ||
| CE standards | ||
| Manual Advance | ||
| Base cabinet |
Do you need more information about this second-hand ERLO SER-30 Drill?
Contact us and we will inform you without any commitment on this table drill1. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Taladro Ibarmia
Technical characteristics of the second-hand Ibarmia Ax-32 column drill
| Reference: | 191-D055 | |
| Table: | 480 x 400 mm | |
| Drill bit: | 32 mm | |
| Distance from the spine center center | 300 mm. | |
| Spindle travel | 150 mm. | |
| Number of speeds: | 9, from 104 to 1450 | |
| Advance: | automatic | |
| Main motor: | 1,2 Kw | |
| Approx machine weight: | 385 Kgs. | |
| Column diameter | 125 mm. | |
| Equipped with: | ||
| Rotating table | ||
| CE standards |
Do you need more information about this second-hand Ibarmia Ax-32 column drill?
Contact us and we will inform you without any commitment on this second hand drill IBARMIA . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Taladros – S/M – ARA-MON
Technical features of used tabletop drills
Brands: S/M Y ARA-MON 601
Drill Ø: 13 mm and 16 mm
More info:
Need more information about these second-hand tabletop drills?
Contact us and we will inform you without any commitment on these tabletop drills. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
EBA drill
Technical features of the used EBA radial drill
| Reference: | 193-TM22 | |
| Table: | 1300x650 mm | |
| Spindle taper: | MK4 | |
| Working capacity: | 32 mm | |
| Tapping capacity: | M30 | |
| Spindle stroke: | 150 mm | |
| Column travel: | 1640 mm | |
| Min distance spindle axis -column: | 230 mm | |
| Max distance spindle axis-column: | 1030 mm | |
| Rotation on column: | 360º | |
| Speeds: | 12, from 102 to 2000 rpm | |
| Clamping: | hydraulic | |
| Engine power: | 10 CV | |
| Approx machine weight: | 1570 Kgs | |
| Equipped with: | ||
| Rear fixed table: | 1300x660 mm | |
| CE standards: | Yes |
Need more information about this second-hand EBA radial drill?
Contact us and we will inform you without any commitment on this EBA radial drill . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
ERLO SV18 drill
Characteristics of the used ERLO SV18 tabletop drill
| Reference: | 194-TM48 | |
| Max drilling capacity in steel 70 kg: | 18 mm | |
| Max drilling capacity in cast iron 200 Br: | 23 mm | |
| Max steel tapping capacity 70 kg: | M.14 | |
| Max tapping capacity in cast iron 200 Br: | M.18 | |
| Morse Cone number: | 3 | |
| Max drilling depth: | 120 mm | |
| Max tapping depth: | 90 mm | |
| Drilling feed: | Manual | |
| Engine power 1000 rpm: | 1 CV | |
| Approx machine weight: | 240 Kgs | |
| Equipped with: | ||
| Speed electronic variator drive | ||
| Drill guard | ||
| Base cabinet | ||
| Automatic tool ejector |
Do you need more information about this second-hand ERLO SV18 toptable drill?
Contact us and we will inform you without any commitment on this tabletop drill. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
FORADIA MS 60-1600 Drill
Technical characteristics of the second-hand FORADIA MS 60-1600 radial drill
| Reference: | 193-TM71 | |
| Max drilling Ø in steel: | 60 mm | |
| Max drilling Ø in cast iron: | 80 mm | |
| Column diameter: | 410 mm | |
| Arm length: | 1625 mm | |
| Max distance spindle-base: | 1560 mm | |
| Spindle taper: | Morse 5 | |
| Spindle motor: | 7.5 CV | |
| Speeds: | 16, 30 to 1400 rpm | |
| Approx machine weight: | 5500 Kgs | |
| Machine dimensions: | 2600x980x2985 mm | |
| Equipped with: | ||
| Cube table: | 600x400x400 mm | |
| CE standards: | Yes |
Do you need more information about this second-hand FORADIA MS 60-1600 drill?
Contact us and we will inform you without any commitment on this used radial drill FORADIA . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
Drill IBARMIA A45
Technical characteristics of the second-hand IBARMIA A-45 column drill
| Reference: | 191-A036 | |
| Table: | 620x520 mm | |
| Drill bit: | 45 mm | |
| Max drilling depth: | 200 mm | |
| MORSE cone: | 4 | |
| Distance from the center of the bit to the column: | 385 mm | |
| Number of speeds: | 9 (de 61 a 1169 rpm) | |
| Advance: | auto mechanic | |
| Main motor: | 3 CV | |
| Approx machine weight: | 640 kgs | |
| Machine dimensions: | 2500x600x1200 mm |
Do you need more information about this second-hand IBARMIA A-45 column drill?
Contact us and we will inform you without any commitment on this second hand drill IBARMIA . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
EBA drill
Technical features of the used EBA radial drill
| Reference: | 193-A032 | |
| Table: | 1300x650 mm | |
| Spindle taper: | MK4 | |
| Working capacity: | 32 mm | |
| Tapping capacity: | M30 | |
| Spindle stroke: | 150 mm | |
| Column travel: | 410 mm | |
| Min distance spindle axis -column: | 300 mm | |
| Max distance spindle axis-column: | 1100 mm | |
| Rotation on column: | 360º | |
| Speeds: | 12, from 102 to 2000 rpm | |
| Clamping: | hydraulic | |
| Engine power: | 4 CV | |
| Approx machine weight: | 1.550 Kgs | |
| Dimensions: | 1050 x 1415 x 2600 mm. | |
| Equipped with: | ||
| Back sine table: | 600x400 mm | |
| Back table with slots: | 1300x650 mm | |
| CE standards: | Yes |
Need more information about this second-hand EBA radial drill?
Contact us and we will inform you without any commitment on this EBA radial drill . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
