+ 34 935 730 225 
BEHRINGER HBP-360/704 GA NA 3000 bandsaw
Technical characteristics of the used BEHRINGER HBP-360/704 GA NA 3000 automatic bandsaw
| Reference: | 170-A014 | |
| Round cutting: | 360 mm | |
| Rectangular cutting: | 700x340 mm | |
| Cut at 15º right and left | ||
| Round: | Ø 340 mm | |
| Falt (W x H): | 650x340 mm | |
| Cut at 30º right and left | ||
| Round: | Ø 340 mm | |
| Falt (W x H): | 600x340 mm | |
| Cut at 45º right and left | ||
| Round: | Ø 340 mm | |
| Falt (W x H): | 400x340 mm | |
| Minimum cutting range | ||
| Round: | 20 mm | |
| Flat: | 20x20 mm | |
| Band dimensions: | 6300x41x1.30 mm | |
| Band speed: | 19-130 m/min | |
| Coolant supply: | 150 l | |
| Voltage: | 400 V, 50 Hz | |
| Engine power: | 5.5 kW | |
| Total power: | 10 kW | |
| Weight: | 5800 Kgs | |
| Machine dimensions (without accessories): | 6000x3500x2900 mm | |
| Equipped with: | ||
| PLC control and device with LCD display | ||
| Miter cutting device: | 90º ± 45º | |
| Workpiece table | ||
| Rollers: | 1x200 mm and 2x500 mm | |
| Vice of piece clamping | ||
| Chip conveyor |
Do you need more information about this used BEHRINGER HBP-360/704 GA NA 3000 automatic bandsaw?
Contact us and we will inform you without any commitment on this used bandsaw. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
CMZ TBI 520-A cnc lathe
Technical characteristics of the second hand CMZ TBI 520-A cnc lathe
| Reference: | 218-A008 | |
| Distance between centers: | 1100 mm | |
| Max turning length: | 1090 mm | |
| Max swing over bed: | 520 mm | |
| Max swing over slide: | 400 mm | |
| Spindle hole diameter: | 91 mm | |
| X-axis travel: | 212 mm | |
| Z-axis travel: | 1090 mm | |
| Rapid feeds X/Z: | 18/24 m/min | |
| Speed range: | 3500 rpm | |
| Spindle power: | 37 kw | |
| Approx machine weight: | 5500 kgs | |
| Machine dimensions: | 3710x1520x1900 mm | |
| Equipped with: | ||
| Control: | FANUC | |
| Chuck: | Ø 250 mm | |
| Turret: | 8 tools | |
| Tools: | according photo |
Do you need more information about this second-hand CMZ TBI 520-A cnc lathe?
Contact us and we will inform you without any commitment on this CMZ cnc lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
MTE BF-4200 milling machine
Technical characteristics of the fixed bench mill MTE BF-4200 of second hand (retrofitated machine)
| Reference: | 073-A013 | |
| Table dimensions: | 4200x1000 mm | |
| Number of T-slots: | 7 | |
| T slots measures: | 22 mm | |
| Max weight on table: | 13.000 kgs | |
| X-axis traverse: | 4000 mm | |
| Y-axis traverse: | 1200 mm | |
| Z-axis traverse: | 1500 mm | |
| Milling head model: | Automatic | |
| Spindle taper: | 50 DIN 2080 | |
| Speed range: | 3 ranges | |
| Speed: | 40-3000 rpm | |
| Main motor power: | 22 kw | |
| Year: | 2004 | |
| Equipped with: | ||
| Control: | HEIDENHAIN iTNC 530 | |
| Electronic handwheel: | HR-410 | |
| Tool magazine: | 20 tools | |
| Internal coolant supply: | 20 bar - with paper filter | |
| Chip conveyor: | Yes |
MTE BF-4200 fixed benchmate specifications of fixed bench
This second-hand MTE BF-4200 fixed bench milling company is made in 2004 and equipped with Heidenhain ITC 530. With a 4200 × 1000 mm table that has 7 22 mm T slot Automatic head and cone 50 DIN 2080. It is currently fully retrofitated.
Do you need more information about this used MTE BF-4200 bed type milling machine?
Contact us and we will inform you without any commitment on this used MTE milling machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GEMINIS GHT6 G4 1300 x 6000 lathe
Technical characteristics of second hand GEMINIS GHT6 G4 1300×6000 cnc lathe
| Reference: | 218-A010 | |
| Distance between centers: | 6000 mm | |
| Height centers: | 665 mm | |
| Max swing over bed: | 1300 mm | |
| Swing over cross slide: | 1000 mm | |
| Cross slide travel: | 650 mm | |
| Main spindle hole diam: | 162 mm | |
| Spindle nose: | DIN 55026: 15" | |
| Quill diameter: | 180 mm | |
| Quill travel: | 300 mm | |
| Speed: | 0-800 rpm | |
| Total power required: | 50 kW | |
| Approx machine weight: | 18.7 Tn | |
| Machine dimensions: | 10.5x2.6x2.4 m | |
| Year: | 2008 | |
| Equipped with: | ||
| Control: | FAGOR 8055 TC/C | |
| Electronic handwheel: | Yes | |
| 4 jaw chuck: | Ø 1200 mm - 509 rpm | |
| Automatic turret: | SAUTER 4 stations | |
| Chip conveyor: | Yes | |
| Coolant supply: | 6 bar | |
| Lubrication: | automatic | |
| Boring support: | bar Ø 150 mm | |
| 3 steady rests: | Ø 100-900 mm | |
| 1 lower part steady rest: | Ø 400-700 mm | |
| 1 self-made piece for the steady rest | ||
| Tool holders: | 2 | |
| CE marking: | Yes |
Do you need more information about this second-hand GEMINIS GHT6 G4 1300×6000 cnc lathe?
Contact us and we will inform you without any commitment on this GEMINIS cnc lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
KENT KGS-84 tangential grinder
Technical features of the second-hand KENT KGS-84 SD1 tangential grinder
| Reference: | 163-Z029 | |
| Table travel: | 930 mm | |
| Longitudinal traverse (X-axis): | 880 mm | |
| Cross traverse (Y-axis): | 450 mm | |
| Height from table to center of the axis: | 590 mm | |
| Grinding wheel dimensions: | Ø 350x50 mm | |
| Grinding wheel speed: | 1730-60 Hz / 1440-50 Hz | |
| Grinding wheel power: | 3.7 kw | |
| Approximate weight: | 2800 Kgs | |
| Machine dimensions: | 2500x1800x2000 mm | |
| Equipped with: | ||
| Kent electromagnetic chuck: | 800x400 mm | |
| Paper filter diposit: | Yes |
Do you need more information on this second-hand KENT KGS-84 SD1 tangential grinding machine?
Contact us and we will inform you without any commitment on this KENT tangential grinder. In addition, if you wish, you can also visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, conventional lathes, cnc lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
FORADIA GR 50-1200 drill
Technical features of the second-hand FORADIA GR 50/1200 radial drill
| Reference: | 193-A005 | |
| Max drilling diameter: | 50 mm | |
| Distance between the spindle axis and column: | Max 1350 mm - Min 435 mm | |
| Horizontal movement of the spindle head: | 1200 mm | |
| Vertical movement of the arm: | 715 mm | |
| Rotation angle of the arm: | 360º | |
| MORSE cone: | 4 | |
| Speed range: | 12, 35 -1460 mm | |
| Spindle travel: | 225 mm | |
| Clamping: | Hydraulic | |
| Main motor power: | 3.5 CV | |
| Approx machine weight: | 2300 Kgs | |
| Machine dimensions: | 1825x780x2650 mm | |
| Equipped with: | ||
| Tilting cube table: | 705x500x525 mm | |
| Hydraulic vice: | Opening 135 mm. Mouth 125 mm. |
Do you need more information about this second-hand FORADIA GR 50/1200 drill?
Contact us and we will inform you without any commitment on this used radial drill FORADIA . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
GEMINIS GE-650 lathe
Technical characteristics of the second-hand GEMINIS GE-650 universal lathe
| Reference: | 211-A002 | |
| Distance between centers: | 1500 mm | |
| Centers' height: | 315 mm | |
| Max swing over bed: | 650 mm | |
| Max swing over slide: | 390 mm | |
| Swing over gap: | 820 mm | |
| Bed width: | 450 mm | |
| Main spindle hole diam: | 82 mm | |
| Max quill travel: | 270 mm | |
| Speeds: | 18, 16 to 1250 rpm | |
| Main motor power: | 12.5 CV | |
| Equipped with: | ||
| FAGOR digital readouts: | 2 axes | |
| 3-jaw universal chuck: | Ø 310 mm | |
| 4 independent jaw chuck: | Ø 500 mm | |
| Tools: | according photo |
Do you need more information about this second-hand GEMINIS GE-650 universal lathe?
Contact us and we will inform you without any commitment on this GEMINIS lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, CNC lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
PINACHO L8/180 lathe
Technical characteristics of the second-hand PINACHO L8/180 universal lathe
| Reference: | 211-A004 | |
| Distance between centers: | 1000 mm | |
| Centers' height: | 180 mm | |
| Max swing over bed: | 360 mm | |
| Swing over gap: | 510 mm | |
| Bed width: | 250 mm | |
| Main spindle hole diam: | 42 mm | |
| Speeds: | 4, 30-2000 rpm | |
| Engine power: | 2 CV | |
| Approx machine weight: | 900 kgs | |
| Machine dimensions: | 1260x820x1930 mm | |
| Equipped with: | ||
| 3-jaw universal chuck: | 200 mm diameter with 2 sets of jaws | |
| Tools: | according photo |
Do you need more information about this second-hand PINACHO L8/180 universal lathe?
Contact us and we will inform you without any commitment on this PINACHO lathe. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, CNC lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
ZAYER XIOS 4000 milling machine
Technical features of the second-hand ZAYER XIOS 4000 bed type milling machine
| Reference: | 073-A001 | |
| Table dimensions: | 4000x1300 mm | |
| Number of T-slots: | 9 | |
| T slots measures: | 22 mm | |
| Max weight on table: | 10.000 kgs | |
| X-axis traverse: | 4000 mm | |
| Y-axis traverse: | 1500 mm | |
| Z-axis traverse: | 1600 mm | |
| Milling head model: | Automatic, 360,000 pos 45º (2 bodies) | |
| Spindle taper: | DIN 69871 AD50 | |
| Speed range: | 32-4500 rpm | |
| Main motor power: | 32 kw | |
| Feedrate: | 15,000 mm/min | |
| Rapid traverses (X, Y, Z): | 30,000 mm/min | |
| Year: | 2014 (Delivered mid-2015) | |
| Spindle hours: | 1700 approx | |
| Equipped with: | ||
| Control: | HEIDENHAIN iTNC 530 | |
| Electronic handwheel: | HR 410 | |
| Coolant supply: | internal | |
| Chip conveyor: | Yes | |
| Paper filter diposit: | Yes | |
| 3 squares: | 2040 x 700 x 700 mm | |
| 2 prisms (for support and machining of rollers): | 1310 x 310 x 400 mm with 3 mouths | |
| 2 ARNOLD hydraulic vices: | Mouth 200 mm | |
| Set of tools: | Yes |
Do you need more information about this ZAYER XIOS 4000 bed type milling machine?
Contact us and we will inform you without any commitment on this bed type milling machine . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
HOYTOM GH-500 slotting machine
Technical characteristics of the second-hand HOYTOM GH-500 slotting machine
| Reference: | 240-A003 | |
| Max slot length: | 500 mm | |
| Max slot width: | 50 mm | |
| Cutting speed: | 7.5 m/min | |
| Return speed: | 15 m/min | |
| Main motor power: | 3 CV | |
| Equipped with: | ||
| Very well equipped: | according photo |
Do you need more information about this second-hand HOYTOM GH-500 slotting machine?
Contact us and we will inform you without any commitment on this HOYTOM slotting machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
