+ 34 935 730 225 
ERLO TSR-25 Drill
Technical characteristics of the second-hand ERLO TSR-25 column drill
| Reference: | 191-B021 | |
| Table: | 270x300 mm | |
| Column diameter: | 100 mm | |
| Max drilling capacity in steel of 70 kgs: | 25 mm | |
| Max drilling capacity in 200Br cast iron: | 30 mm | |
| Max drilling depth: | 120 mm | |
| MORSE cone: | 3 | |
| Drill feed: | manual | |
| Main motor: | 1.6 HP | |
| Drill weight: | 260 kgs | |
| Equipped with: | ||
| CE standards: | Yes | |
| Drill holder: | Yes |
Do you need more information about this second-hand ERLO TSR-25 column drill?
Contact us and we will inform you without any commitment on this second hand ERLO drill . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
IBARMIA 35-CA Drill
Technical characteristics of the second-hand IBARMIA 35-CA column drill
| Reference: | 191-B020 | |
| Table: | 510x510 mm | |
| Column diameter: | 160 mm | |
| Max drilling capacity in steel of 70 kgs: | 35 mm | |
| Max drilling capacity in 100Br cast iron: | 55 mm | |
| Max drilling depth: | 200 mm | |
| MORSE cone: | 4 | |
| Number of speeds: | 9 (from 71 to 1344 rpm) | |
| Feedrate: | 0,2-0-0,1-0,3 | |
| Main motor: | 2 HP | |
| Equipped with: | ||
| Manual vice: | Yes | |
| CE standards: | Yes | |
| Drill holder: | Yes |
Do you need more information about this used IBARMIA 35-CA column drill?
Contact us and we will inform you without any commitment on this second hand drill IBARMIA . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
AWEA BM-1300 machining center
Technical characteristics of the used AWEA BM-1300 mechanized center
| Reference: | 075-B018 | |
| Table: | 1500x800 mm | |
| Max weight on table: | 1200 Kgs | |
| X-axis traverse: | 1300 mm | |
| Y-axis traverse: | 800 mm | |
| Z-axis traverse: | 700 mm | |
| Spindle taper: | ISO-50 | |
| Speed: | 65-6000 rpm | |
| Spindle motor (cont/30min) | 15/20 HP | |
| Potencia total instalada | 40 for | |
| Rapid traverses (X,Y): | 15000 mm/min | |
| Rapid traverse (Z): | 12000 mm/min | |
| Approx machine weight: | 11000 kgs | |
| Machine dimensions: | 3010x3780x2720 mm | |
| Year: | 2004 | |
| Equipped with: | ||
| Control: | HEINDENHAIN 530 | |
| Electronic handwheel: | Yes | |
| Tool magazine: | 20 htas | |
| Cooling through the tool | Yes | |
| Spindle cooling | Yes | |
| Chip conveyor: | 2 internal worm type extractors + 1 chain puller |
Specifications of the Awea BM-1300 machining center on occasion
We offer this second-hand Awea BM-1300 machining center, manufactured in 2004 and equipped with Heindenhain 530. It has a 1500 × 800 mm table capable of supporting up to 1200 kgs. Its 1300 mm routes on the x axis, 800 mm on the Y and 700 mm axis on the Z axis, along with its iso-50 spindle cone, convert it into a versatile machine for multiple industrial applications. It is in optimal operating conditions and available for immediate delivery in our used industrial machinery stock.
Do you need more information about this second-hand AWEA BM-1300 machining center?
Contact us and we will inform you without any commitment on this vertical machining center. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, cnc lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
+34 678 66 35 84
AWEA AF-1460 machining center
Technical characteristics of the used AWEA AF-1460 machining center
| Reference: | 075-A035 | |
| Table: | 1500x620 mm | |
| Height over floor: | 880 mm | |
| Max weight on table: | 1000 Kgs | |
| X-axis traverse: | 1460 mm | |
| Y-axis traverse: | 620 mm | |
| Z-axis traverse: | 620 mm | |
| Spindle taper: | BT-40 | |
| Speed: | 15000 rpm | |
| Rapid traverses (X,Y): | 48000 mm/min | |
| Rapid traverse (Z): | 36000 mm/min | |
| Approx machine weight: | 8200 kgs | |
| Machine dimensions: | 5000x2875x3445 mm | |
| Year: | 2016 | |
| Equipped with: | ||
| Control: | FANUC 0i-MF | |
| Electronic handwheel: | Yes | |
| Tool magazine: | 24 tools | |
| Auger chip conveyor: | 3 | |
| Chain chip conveyor: | 1 |
Do you need more information about this second-hand AWEA AF-1460 machining center?
Contact us and we will inform you without any commitment on this vertical machining center. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: Conventional milling machines, cnc milling machines, conventional lathes, cnc lathes, grinders, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
LAGUN GBM 26 ATC milling machine
Technical characteristics of the second-hand LAGUN GBM 26 ATC bed type milling machine
| Reference: | 073-B005 | |
| Table: | 2600x800 mm | |
| T-slots: | 5x22x140 mm | |
| Maximum weight on table: | 6500 Kgs | |
| Longitudinal traverse (X-axis): | 2500 mm | |
| Cross traverse (Y-axis): | 1000 mm | |
| Vertical traverse (Z-axis): | 1200 mm | |
| Milling head model: | Automatic 2 positions | |
| Spindle taper: | 50 OF 69871/A | |
| Speed range: | 3000 r.p.m. | |
| Power: | 22 kw | |
| Rapid traverses: | 15000 mm/min | |
| Approx machine weight: | 11650 kgs | |
| Machine dimensions: | 6689x5043x3440 mm | |
| Year: | 2003 | |
| Equipped with: | ||
| Control: | HEIDENHAIN 426 | |
| Electronic handwheel: | HEIDENHAIN HR-410 | |
| 4th axis with MECA indexing plate: | Ø 500 mm | |
| RANDOM tool changer: | 24 tools |
Do you need more information about this second-hand LAGUN GBM 26 ATC bed type milling machine?
Contact us and we will inform you without any commitment on this bed type milling machine . Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, cylinders, shears, press brakes, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
MG CY 275 BA band saw
Technical characteristics of the used MG CY 275 BA band saw with automatic and adjustable lowering
Cutting data
Round | Rectangular | Square | |
90º | 225 mm. | 245×180 mm. | – |
| 45º | 160 mm. | – | 160×160 mm. |
| 60º | 100 mm. | – | – |
| Reference: | 170-B011 | |
| Band dimensions: | 2480x27x0.9 mm | |
| Band speed: | 36-72 m/min | |
| Approx machine weight: | 200 Kgs |
Do you need more information about this second-hand MG CY 275 BA band saw?
Contact us and we will inform you without any commitment on this band saw with automatic and adjustable lowering. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com1
+34 935 730 225
CMA RN-12 tapping machine
Technical characteristics of the second-hand CMA RN-12 tapping machine
| Reference: | 080-B013 | |
| Tapping capacity: | M3-M12 | |
| Working speed: | 400 rpm | |
| Working pressure: | 7 kg/cm2 | |
| Air consumption: | 650 l/min | |
| Approx machine weight: | 100 kgs | |
| Equipped with: | ||
| Table: | 925x600x840 mm | |
| Manual vice: | Yes | |
| 7 tap holders: | Different sizes |
Do you need more information about this second-hand CMA RN-12 tapping machine?
Contact us and we will inform you without any commitment on this used tapping machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
ESTARTA301 MV centerless
Information of the used ESTARTA 301 MV centerless grinding machine
ESTARTA, as SORALUCE, belongs to DANOBATGROUP. DANOBATGROUP is the most important business group of machine tool manufacturing nationwide.
ESTARTA is characterized by being one of the most accurate machines in the grinding field. This second hand ESTARTA 301 MV centerless grinding machine is equipped with a control FANUC. This machine has been overhauled by our technical team and can do lots of works. It can work both in in-feed as in through-feed.
This second-hand centerless grinding machine is very well equipped and it can be seen on our premises.
Technical features of the second hand ESTARTA 301 MV grinding machine
| Reference: | 165-B017 | |
| Min-max grinding diameter: | 1,5-50 mm | |
| In-feed grinding length (max): | 125 mm | |
| Grinding wheel dimensions (ODxWidthxID): | 300x125x175 mm | |
| Regulating wheel dimensions (ODxWidthxID): | 220x125x125 mm | |
| OD (min) grinding wheel: | 220 mm | |
| OD (min) regulating wheel: | 165 mm | |
| Grinding wheel peripheral speed: | 35 m/s | |
| Regulating wheel speeds: | De 10 and 250 min -1 | |
| Height dresser regulator regulating wheel: | +15 / -10 mm | |
| Max grinding and regulating wheel's profile depth: | 8 mm | |
| Max working wheel orientation: | 30º | |
| Diamond wheel feed rate: | 100-150 mm/min | |
| Grinding wheel power: | 7,5 kW | |
| Regulating wheel power: | 0,75 kW | |
| Approximate machine weight: | 1.800 kgs | |
| Machine dimensions: | 2525x1942x1450 mm | |
| Year: | 2008 | |
| Equipped with: | ||
| Numerical Control: | FANUC | |
| In through and in-feed grinding | ||
| Vibrator feeder with automatic loading and unloading manipulator | ||
| Grinding wheel balancing bars |
Do you need more information about this second hand ESTARTA 301 MV grinding machine?
Contact us and we will inform you without any commitment on this ESTARTA 301 MV grinding machine. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
IBARMIA 35-CA Drill
Technical characteristics of the second-hand IBARMIA 35-CA column drill
| Reference: | 191-B009 | |
| Table: | 560x480 mm | |
| Column diameter: | 160 mm | |
| Max drilling capacity in steel of 70 kgs: | 35 mm | |
| Max drilling capacity in 100Br cast iron: | 55 mm | |
| Max drilling depth: | 200 mm | |
| MORSE cone: | 4 | |
| Number of speeds: | 9 (from 71 to 1344 rpm) | |
| Feedrate: | 0,2-0-0,1-0,3 | |
| Main motor: | 2 HP | |
| Equipped with: | ||
| Manual vice: | Yes | |
| Drill bits and bits holders: | Yes |
Do you need more information about this used IBARMIA 35-CA column drill?
Contact us and we will inform you without any commitment on this used IBARMIA drill. Please feel free to visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial equipment: machining centers, conventional lathes, CNC lathes, cylinders, shears, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
LAGUN FTV-4 milling machine
Information on the second-hand turret LAGUN FTV-4 milling machine
The machine tool manufacturer LAGUN is one of the companies with the longest history in Spain. LAGUN began manufacturing universal milling machines and turret milling machines. To this day it carries on selling machines of this type.
The LAGUN FTV-4 turret milling machine from our stock of used machinery is an ideal machine for machining that requires agility and quality in milling. It can be used in sectors such as the wind power sector, aeronautics, the automotive sector, mining, etc.
Technical characteristics of the used LAGUN FTV-4 turret milling machine
| Reference: | 072-B008 | |
| Table: | 1372x280 mm | |
| X-axis traverse: | 800 mm | |
| Y-axis traverse: | 345 mm | |
| Z-axis traverse: | 400 mm | |
| Ram traverse: | 570 mm | |
| Quill traverse: | 127 mm | |
| Head moves right and left: | 90º | |
| Head tilts from to back: | 45º | |
| Spindle taper: | Spindle cone ISO 40 | |
| Speed range: | 50-3750 (50 Hz) | |
| Feeds per spindle revolution: | 0.04-0.08-0.16 mm | |
| Chromed quill diam: | 85,70 mm | |
| Min/Max distance from spindle center to body: | 130-700 mm | |
| Max distance from spindle to table: | 415 mm | |
| Number of feedrates: | 12 | |
| Longitudinal and cross feedrate: | Min 20 mm Max 920 mm | |
| Vertical feedrate: | Min 6 mm Max 276 mm | |
| Rapid traverse (X,Y/Z): | 2600 mm / 800 mm | |
| Main spindle: | 4 HP | |
| Feed motor: | 1.50 HP | |
| Coolant pump: | 0.08 HP | |
| Approximate machine weight: | 1450 kgs | |
| Equipped with: | ||
| Digitals: | ANILAM | |
| biting: | mouth 120 mm | |
| Set of collect chuck: | 1 | |
| Various tools: | Yes |
Need more information on that second-hand LAGUN FTV-4 milling machine?
Contact us and we will inform you without any commitment on this turret milling machine LAGUN. If you wish, you can also visit our facilities located in Parets del Vallés (Barcelona), where we have all kinds of new and used industrial machinery: machining centers, conventional lathes, cnc lathes, bending machines, shears, folding machines, grinding machines, etc.
You can reach us via:
cecamasa@cecamasa.com
+34 935 730 225
